搜索资源列表
lab17-Traffic
- 交通灯实验 1．掌握交通灯控制原理 2．掌握用DSP方法驱动交通灯的方法。 17.2 实验原理 在本实验中交通灯用发光二极管模拟。这种发光二极管有三个引脚。一个接地，另外两个接驱动电平。它能发三种不同颜色的光。 -an experimental traffic lights. Master control traffic lights Principle 2. Master DSP-driven method of traffic lights. 17.2 exper
DIPcontrolLED 基于DSP的拨码开关控制LED灯的亮灭
- 基于DSP的拨码开关控制LED灯的亮灭，是在TMSVC5509A上在CCS开发工具中编写的。-dsp led dip ccs tmsvc 5509
main.rar
- 使用了EvaTimer1来控制LED灯的亮灭,你在学习中 可通过它来了解EV的定时器工作原理,对以后做电机之类的控 ** 可看到板上8个发光二极管产生流水灯的效果 ,EvaTimer1 to control the use of bright LED lights eliminate, you can study it to understand the EV timer works, right after the class to do motor control board** you
USB_AD
- 实验目的:学习DSP内部定时器0的使用 ** ** 实验说明:本实验是通过使用DSP内部的定时器0来实现对LED灯的控制 ** ** 大家在刚开始学习时最好先把我们所提供的课本上的第一,二, ** ** 六章有个了解,然后在来学习.第一二章分别介绍了DSP的基本 ** ** 组成,第六章讲了DSP的C语言编程风格 ** ** 实验结果:可看到板上8个发光二极管奇数号LED与偶数号LED交替闪烁 -Experimental purposes: to learn the
GpioLed02
- 使用DSpPWM1-PWM6引脚作为通用的I/O口来控制BASIC2812上LED灯D1-D6的闪烁,LED灯闪烁的速度由慢逐渐变快，然后又逐渐变慢，如此重复。-Use DSpPWM1-PWM6 pins as general-purpose I/O port to control the LED lights on BASIC2812 D1-D6 of the flash, LED flashing lights gradually faster from slow speed, then g
01_GPIOLed01
- 使用PWM1-PWM6引脚作为通用的I/O口来控制Basic2812上LED灯 -PWM1-PWM6 use as a common pin I/O port to control the LED lights on Basic2812
EX01_CpuTimer0
- DSP 2812 采用定时器来控制 LED灯得亮灭 C语言编程 。程序已经通过测试-DSP 2812 uses a timer to control the LED lights have lit off C language programming. Program has been tested
F2812_Gpio
- F2812 GPIO控制LED灯亮1s，灭1s。（CCS3.3开发环境）-F2812 GPIO control LED lights 1s, OFF 1s. (CCS3.3 Development Environment)
GPIO_LED
- DSP通用IO控制LED灯闪烁程序，已经在TMS320F28335开发板上通过-General IO control DSP LED lights flashing procedures are adopted in the TMS320F28335 development board
led
- 基于TMS320VC5416的定时器编程，DSP工作在8MHZ主频，定时器分频系数为15，通过DSP通用I/O引脚控制指示灯闪烁，指示灯每秒闪烁1次。-TMS320VC5416 timer based programming, DSP working in 8MHZ frequency, the timer frequency factor of 15, through the general-purpose DSP I/O pin control light is blinking, the
LED_on_off
- 改程序详细介绍了如何使用TMS320F2812通过GPIO对LED灯进行控制，可以说实现LED亮灭，循环点亮，循环流水灯。-The program introduces how to use TMS320F2812 through GPIO control of LED lights, can say realize kill bright light, LED lamp, circulation water cycle.
led.c
- DSP F2812 EVM板上LED灯的控制方法。-Control LED light on DSP F2812 EVM board
28335PWM
- DSP28335PWM控制LED灯，通过PWM实现LED灯的亮暗，初学者可通过此程序初步了解PWM模块，了解其寄存器-DSP28335PWM control the LED lights, LED lights bright and dark, through PWM beginners through this procedure a preliminary understanding of the PWM module
led
- sdk6455_led程序，控制6455开发板led灯，实现流水灯等操作-sdk6455_led procedures, control development board led is turned on and off
Two-LED-Blinking
- 学习TMS320F28335时写的简单的GPIO翻转程序，控制两个LED灯的亮暗，间隔一秒左右。-TMS320F28335 GPIO toggle.
led
- DSP2812LED测试程序，利用2812的GPIO口实现LED灯的控制-DSP2812LED testing procedures, the use of GPIO port 2812 to control LED lights
LEDcontrol
- 非常适于新手学习的基于DSP28335的LED灯控制驱动程序-Ideal for novice learning DSP28335-based LED light control driver
VMD642_led
- 通过改变 LED 灯控制寄存器的值，分别实现LED 灯一个个点亮和一个个关闭，以及每次只点亮一只。-LED lights controlled by changing the value of the register, respectively, to achieve LED lights lit one and one closed, and only lit each one.
Lab0301-LED
- DSP 关于LED灯控制的程序，有开关控制灯的亮灭-DSP about LED lamp control procedures, had an on/off switch
led
- 本代码由DSP单片机控制LED灯，实现跑马灯的设计-The code consists of DSP microprocessor controlled LED lights, designed to achieve Marquee