搜索资源列表
I2C_IPcore_VHDL
- 这是一个I2C串行数据通信协议以VHDL硬件描述语言实现的IP核，可直接编译运行-I2C serial data communication protocol to VHDL hardware descr iption language of the IP core can be directly translated Operation
CAN_IPCore
- CAN_IPCore CAN协议的IP核源代码 verilog 语言
SDCard_Controller.rar
- SD卡控制器IP. 兼容SD卡协议2.0。与wishbone bus 接口，方便与其他IP连接使用。 ,SD Card Controller IP. Compatible with SD Card Agreement 2.0. With the wishbone bus interface to facilitate the use of other IP connections.
CAN_IP.rar
- 这是CAN总线控制器的IP核，源码是由Verilog HDL编写的。其硬件结构与SJA1000类似，满足CAN2.0B协议。,This is a IP core of the CAN bus controller written by the Verilog HDL. whose structure is similar with SJA1000,supporting the protocol of CAN2.0B.
i2c_ip.zip
- I2C的ip核，Verilog实现，可以直接用在你的项目中。I2C是一种简单实用的通讯协议。,I2C' s ip nuclear, Verilog realization, you can directly use in your projects. I2C is a simple and practical protocol.
HDLC
- verilog HDL语言编写的HDLC协议的IP核，包括通讯控制及CRC。-written in verilog HDL HDLC protocol IP core, including communications control and CRC.
user_logic_0
- 基于microblaze EDK 工程，实现六种RFID 协议的ip core。-Based on microblaze EDK project, to achieve the six RFID protocol ip core.
OpenCorespcicore
- PCI IP核功能实现，符合V2.2协议-realize pci function
CANProtocolControllerIPCoreinVerilog
- 一种基于CAN协议的IP核源代码，用Verilog语言实现-CAN Protocol Controller IP Core in Verilog.
s3en_tcp
- 基于spartan3e开发板的嵌入式EDK软件平台下的TCP/IP协议的网口程序-Embedded development board based on spartan3e EDK software platform for TCP/IP protocol network port procedures
tcpudp
- 在niosii环境下，通过建立SPI核来驱动以太网控制器enc28j60，并通过嵌入tcp/ip协议来实现网口通信。-Niosii environment, through the establishment of the SPI core to drive the Ethernet controller enc28j60 embedded tcp/ip protocol to the network port communications.
SDK_lwip_echo_server
- Xilinx spartan-3e开发板，EDK的配置，及SDK的一个TCP echo server的实例。运用LWIP（Light Weight IP）轻型IP协议。-Xilinx Spartan-3e development board the EDK' s configuration, and the SDK a TCP echo server instance. The use of the the light IP protocol of LWIP (Light Weight I
udp_ip_stack_latest.tar
- 用FPGA实现UDP/IP协议传输，有很多版本，可以参考参考-FPGA implementation using UDP/IP protocol to transfer
udpip
- 赛灵思XILINX FPGA verilog写的UDP/IP协议，可用。-I am prepared to use verilog UDP protocol, the test is available.
Ahb2Apb
- AHB总线协议转APB总线协议的接口IP，使用Verilog代码实现，有详细的英文注释(AHB bus protocol turn APB bus interface IP, use Verilog code implementation, and have a detailed knowledge of the English comments)
ip核
- 购买的beckoff公司的ip核，提供了详细的datasheet以及协议说明，附上调用ip核的文件，采用verilog编写，平台可以在ISE里自己设置(Buy the beckoff company's ip kernel, provides a detailed datasheet and protocol descr iption, attached to the ip kernel file, using verilog prepared, the platform can be set
Wavemaster_W5300
- 用FPGA语言，基于W5300芯片实现TCP/IP协议的网络传输，将W5300部分程序实现IP封装，只有输入输出管脚和时钟，复位等管脚(FPGA language is used to realize the network transmission of TCP/IP protocol based on W5300 chip. The W5300 part of the program realizes IP packaging, and only the input and output p
LaSaNewNB_M88E1111_TCP1000mhz
- 用FPGA，基于M88E1111芯片实现的TCP/IP协议的千兆网，将协议封装成IP核(With the FPGA, the TCP/IP protocol based on the M88E1111 chip is used to encapsulate the protocol into IP core)
imports
- 用FPGA实现UDP/IP协议，对于想用FPGA实现UDP/IP协议的可以看一看(Implementation of UDP/IP protocol with FPGA)
tcp_ip_core_w_dhcp_latest.tar
- 以太网协议 TCP/IP/DHCP协议verilog实现(Ethernet IP/TCP/DHCP verilog source code)