搜索资源列表
1
- 基于FPGA的IIC传输协议的实现，已经验证可以使用-FPGA-based implementation of IIC protocol has been verified using
13-45
- 本程序能够完成的功能是，自动或手动测温，读取配置寄存器，温度下限寄存器，温度上限寄存器，设定温度上限及下限，当温度到达预定的温度的时候报警。所有的读取操作都可以在数码管上显示。其中，温度的上限通过计算机用串口通信协议传输给FPGA内部寄存器然后按动开关写入。同时，本程序还驱动了一个直流电机，温度高的时候电机转速高，温度低的时候转速降低直至停转。数码管可以实时显示电机转速，2秒刷新一次。数码管的显示可以在显示的温度、寄存器值和直流电机转速间切换，切换通过串口进行，计算机发00H时切换到温度及寄存器
IIC
- 利用NIOS软核实现IIC总线协议上数据的传输，并在EEPROM上验证-NIOS soft-core data transmission on the IIC bus protocol, and verify the EEPROM
IIC-VHDL
- iic 总线在设计时要看你所使用的器件的传输或接收时序 只要会一个，其他的都一样 以下是我在一本书上看到的，感觉很不错，你看看就会用了 -as long as the will a the iic bus depends on the devices you use in the design of the transmission or reception of timing, other-like following, I saw in a book, I feel very g
OV7670-initial
- 采用OV7670获取图像，并用IIC总线传输。里面有详细解释-Image obtained using the OV7670 , and use IIC bus. There are detailed explanations
SRAM_GPIF
- 一份usb2.0 gpif模式下的sram接口传输代码，里面包括fw.c,dscr.a51,FX2_SRAM_GPIF.hex,FX2_SRAM_GPIF.iic等文件-A usb2.0 gpif Mode sram interface transfer code, which includes fw.c, dscr.a51, FX2_SRAM_GPIF.hex, FX2_SRAM_GPIF.iic other documents
IIC_EEPROM
- IIC_EEPROM是通过IIC传输方式与EEPROM金星数据传输的Verilog工程原文件。-IIC_EEPROM by IIC transmission of data transfer with EEPROM Venus Verilog project the original file.
IIC_dev
- IIC传输，实际遇到的开发问题处理。很有借鉴意义，避免走弯路哦-IIC transmission, practical problems encountered in the development process. Referential significance, oh avoid detours
i2c_slave
- iic slave端，项目中已经用过，可用适用所有传输速率，板间通信，接口少的情况下，可用该程序实现多参数传输，状态监控。(The IIC slave terminal has been used in the project. It can be applied to all kinds of transmission rate, inter board communication and less interfaces. The program can achieve multi param