搜索资源列表
Synchronous_read_write_RAM
- Synchronous read write RAM verilog。经过modelsim se仿真。
wb_rtc
- // -*- Mode: Verilog -*- // Filename : wb_master.v // Descr iption : Wishbone Master Behavorial // Author : Winefred Washington // Created On : 2002 12 24 // Last Modified By: . // Last Modified On: . // Update Count : 0 // Status : U
EEPROM_RD_WR.rar
- 本程序包含：EEPROM的功能模型(eeprom.v)、读/写EEPROM的verilog HDL 行为模块（eeprom_wr.v）、信号产生模块（signal.v）和顶层模块(top.v) ，这样可以有一个完整的EEPROM的控制模块和测试文件，本文件通过测试。,This procedure includes: EEPROM of the functional model (eeprom.v), read/write EEPROM acts of verilog HDL modules (e
sdram_mdl
- FPGA控制SDRAM程序，包括初始化、读写-SDRAM Initial and Read Write
SRAM_Write_read
- SRAM读写的VHDL实验,通过对写入的数据与读出的数据进行比较,判断读写SRAM是否成功-SRAM read and write VHDL experiments on written data and read data to compare, to judge the success of SRAM read and write
ahb_ram
- AHB接口的ram控制器，可靠性非常强。除了两个周期内发生读到写或写到读的极限情况（一般处理器设计中不会有这种传输方式），其他传输方式完全没有问题-AHB interface ram controller, reliability is very strong. In addition to occurring in two cycles read or write read write the limit (usually processor design will not have such
1302write-and-read
- DS1302写读连用程序，可以设置要写的地址,Verilog语言，在板子上跑过的,可以实现功能的-DS1302 write read Ed program can be set to write the address of the Verilog language, in the board runs, can realize the function
flash
- fpga的FLASH读写VERILOG代码。希望对大家有用-the verilog code of fpga read/write flash
std_cf_2s60_ES
- Altera公司开发板2s60 CF卡通用例程（初始化、读、写、测试等）-Altera Corporation development board 2s60 CF Card routines (initialization, read, write, test, etc.)
NANDFLASH
- 用VHDL开发的NANDFLASH的读写程序,给出 NANDFLASH的时序正确的读写-NANDFLASH developed using VHDL to read and write the procedures, timing NANDFLASH give the correct reading and writing
XAPP204
- Using Block RAM for High-Performance Read.Write Cams
fifo_bde
- FIFo参考设计16x32 FIFO with simultaneous read/write operations.-FIFO design-16x32 FIFO with simultaneous read/write operations.
fifo_vhdl
- FIFO的VHDL编程，其中包括FIFO的读，写，满帧，半满帧信号驱动-FIFO of the VHDL programming, including the FIFO' s read, write, full frame, half-full frame signal drive
uart
- 用FPGA实现uart的verilog源码，包含standard framing error, parity control and overrun detection.-The UART design was designed from a standard uart function with a read/write microprocessor interface. It includes standard framing error, parity control and ove
SRAM_with_con
- 带有控制器的SRAM，提供一个地址选通脉冲ADS，一个读/写信号R_W,一个时钟信号和复位信号，包含了测试文件。-Controller with the SRAM, providing a strobe pulse Address ADS, a read/write signal R_W, a clock signal and reset signal, including the test documents.
LPC2DDR2
- Module Function Descr iption: This module allows a SPI ROM to be used in a LX/CS5536 system. Details are below: 1.Provide a memory window to the SPI EPROM at FFF80000h-FFFFFFFFh (512KB). 2.Provide an interface to the SPI bus to allow the
led_control
- 本实验箱采用的液晶显示屏内置的控制器为SED1520，点阵为122×32，需要两片SED1520组成，由E1，E2分别选通，以控制显示屏的左右两半屏。图形液晶显示模块有两种连接方式，一种为直接访问方式，一种为间接访问方式。本实验采用直接控制方式。 直接控制方式就是将液晶显示模块的接口作为存储器或I/O设备直接挂在计算机总线上。计算机通过地址译码器控制E1和E2的选通；读/写操作信号R/W有地址线A1 控制，命令/数据寄存器选择信号由地址线A0控制。 -The experimenta
test_com
- 本实验是用来测试FPGA和串口之间的通信的，FPGA发数据读串口的写数据，再发到串口显示出来。-This experiment is used to test the communication between the FPGA and the serial port of, FPGA send data read write serial port data, and then sent to the serial port is displayed.
i2c
- 用VHDL写的I2C控制器，可以读写EEPROM，比较经典。-Written with VHDL I2C controller, you can read and write EEPROM, more classic.
SRAM芯片(read&write)
- 自己编写的针对SRAM芯片的Verilog读写程序，非常有用(I have written for SRAM chip Verilog read and write procedures, very useful)