搜索资源列表
uart_tx_rx
- 该工程用verilog编写，已通过串口调试助手调试通过，接收模块采用8倍波特率采样数据，有较好的滤波功能，在PC上完成自发自收功能。-Verilog prepared by the project, has passed through the serial debug debugging assistant, receiving 8 times the baud rate module sampling data, a better filtering in the PC to complet
usb
- 程序说明: 本次实验控制开发板USB，与PC机进行通信，并在显示字符。 目录说明: 工程在\project文件夹里面 源文件和管脚分配在\rtl文件夹里面 下载文件在\download文件夹里面,.mcs为PROM模式下载文件,.bit为JTAG调试下载文件。-Procedure Note: In this experiment, control development board USB, and PC, to communicate, and display char
usb_blaster
- usb下载线usb_blaster，用于cpld\fpga等，刚刚调试完-usb download cable usb_blaster, for cpld \ fpga and so on, had just finished debugging. .
USBInterfacewithFPGA
- 基于USB接口并用FPGA控制的系统，实现实施的数据传输和调试-USB Interface with FPGA based control system to realize the implementation of data transfer and debugging
ISE_lab5
- 使用VHDL 语言编写7 段数码管显示程序， 掌握数码管的驱动方法。使用USB 电缆或并口下载线下载逻辑电路到FPGA，并 调试电路使其正常工作。-Using the VHDL language 7-segment display program, for digital control of the driving method. Using the USB cable or parallel port download cable to download logic to FPGA,
jibenmendianlu
- 熟悉使用 ISE 软件进行简单的VHDL 文本方式设计，学习使用USB 电缆或并口下载线 下载逻辑电路到FPGA，并能调试电路使其正常工作。熟悉数字电路集成设计的过程。-Familiar with ISE software to design a simple VHDL text, learning to use a USB cable or parallel port download cable Download logic to the FPGA, and can debug t
duolufuyongqi
- 1. 学习使用 ISE 软件，并用VHDL 语言设计多路复用器； 2. 使用 USB 电缆下载逻辑电路到FPGA，并能根据电路原理调试电路使其正常工作； 3. 掌握数字电路集成设计的过程-1 Learn to use ISE software, and design using VHDL language multiplexer (2) using a USB cable to download logic to the FPGA, and debug circuit accor
bianmaqijimaqi
- 进一步熟悉 ISE 软件的使用，进行简单的VHDL 文本方式设计，学习使用USB 电缆下载逻辑 电路到FPGA，并能调试电路使其正常工作。熟悉数字电路集成设计的过程。-More familiar with the use of ISE software, a simple way to design the VHDL text, learning to use the USB cable to download logic Circuit to the FPGA, and can de
SLAVE-FIFO8test
- 用于FPGA板子上的USB调试，包括上位机、驱动程序、下位机程序、应用程序。-Used for USB debugging, including PC, and PC driver program and application.
SLAVE-FIFO16-test
- 基于FPGA的USB调试代码，包括上位机代码、驱动程序、应用程序、下位机代码。-USB debugging code based on FPGA, including PC code, driver and PC, application code.
USB_FPGA_IOtest
- 基于FPGA的USB调试代码，包括上位机代码、驱动程序、应用程序、下位机代码。-USB debugging code based on FPGA,including PC code, driver and PC, application code.
USBButton-control-input-test
- 基于FPGA的USB调试代码，包括上位机代码、驱动程序、下位机代码。-USB debugging code based on FPGA,including PC code, driver, application code.
USBLight-LED-test
- 基于FPGA的USB调试LED灯的代码，包括上位机代码、下位机代码。-USB debugging leds code based on FPGA, including PC and PC code code.
uart
- USB与pc机串口通讯的程序，开发环境为quartus11.0.该源程序是仿照黑金的教程来做的。能够往串口调试助手上顺利发文件。-Pc USB and serial port communication program development environment for quartus11.0. The source is modeled black gold tutorial to do. Serial debugging assistant can go on successfully
6_USB_to_SDHC_Lab
- 基于altera公司MAX10型FPGA的usb至sdhc通信的调试程序-Altera company based debugger MAX 10 type of FPGA to sdhc usb communication
fpga usb
- 基于fpga的usb端口verilog调试程序,可利用键盘鼠标控制开发板的一些动作
sp6ex2
- PWM蜂鸣器驱动实例，产生频率为25Hz，占空比为50 的蜂鸣器发声信号；同时详细介绍USB下载线的连接与驱动安装，进行板级的代码在线调试和固化-PWM buzzer driver instance, the frequency of 25Hz, duty cycle of 50 of the buzzer sound signal at the same time the USB download line connection and driver installation, the b
usb2.0调试助手
- 基于usb2.0的C++上位机，实测可用，仅供参考(USB2.0 based C++ upper computer, measured available, for reference only.)