搜索资源列表
sd(sd_4_data_mode)
- sd卡的高速读写程序，sd模式（4数据线），是普通spi模式的约6倍，以及完全的sd卡的data sheet-sd-card reader procedures, sd model (four data lines), is the general pattern of about 20 six times. and full sd card data sheet
STM32实现U盘、SD读卡器功能
- 4、STM32实现U盘、SD读卡器功能STM32实现U盘、SD读卡器功能-4, STM32 to achieve U disk, SD card reader function
LPC1768-Xplorer
- LPC1768-Xplorer is a CORTEX-M3 based stamp board for NGX’s mbed-Xpresso Baseboard. The LPC1768 microcontroller has 512KB of internal flash and 64KB RAM. Ethernet MAC, USB Device/Host/OTG interface, 8-channel general purpose DMA controller, 4 UARTs, 2
SPCE3200LABCODE_16to23
- 凌阳SPCE3200 系统开发板随机自带源程序。共安排了32个子目录，其中按照SPCE3200实验指导书(上册)中的实验顺序存放了实验程序的源代码,所有项目代码均在S+coreIDE v2.1.2下测试通过。此为第16到第23个试验源代码。试验内容如下： 5.3 实验十六：Cache 读写实验. 5.4 实验十七：DMA读写实验 5.5 实验十八：SD卡读取实验 SPCE3200教学平台通信模块实验 6.1 实验十九：SPI通信实验 6.2 实验二十：I2C通信实验.
FatFs_R0.08.dev2_April_4-2010
- FatFs R0.08.dev2 April 4, 2010 by Mr.ChaN from Electronic Lives Mfg. http://elm-chan.org This functions are intended for high level data access to MMC/SD/SD HC Flash memory cards formated using the FAT12, FAT16 or FAT32 standards-FatFs R0.08.dev2 A
stm32V1_2
- 这是我自已为实验室画的基于STM32的PCB，现在将原理图及PCB全部分享，图是用PROTEL 99SE绘制的。可能会有布线不合理之处，仅供大家参考。 实验板资源介绍 1）CPU为100脚STM32F103XX 2）TFTLCD 3）SD卡 4）4X4键盘模块及四个独立按键 5）ISP下载口及20脚JTAG下载口 6）RS232接口、RS485接口、PS/2接口、USB接口 7）I/O口驱动的蜂鸣器 8）I2C口驱动的AT24C02 9）
FAT-SD-card-information
- 全面透析SD卡与FAT相关资料 包括：4.5万字透视FAT32系统；SD存取介质；SD卡的SPI模式（中文）；CSD寄存器解析；基于SPI协议的SD卡读写-FAT SD card with full dialysis-related information, including: 4.5 million characters perspective FAT32 system SD access to media SD card SPI mode (in Chinese) CSD re
TFT-SD
- 实验现象：彩屏中显示汉字、数字、字母！ *实验现象：彩屏中显示4个相同的图片 *实验现象：彩屏中显示矩阵键盘的键值 *实验现象： 彩屏中显示红外遥控按钮的键值 * 实验现象: 彩屏中显示卡的类型名字和容量 *实验现象： SD卡的属性参数-failed to translate
4.STM32-TFT-SD-FAT
- STM32+TFT+SD+红外+fat的程序-STM32+ TFT+ SD+ IR program
2.4-TF-daima
- 彩屏为56元的 2.4寸TFT彩屏，带触摸功能和SD卡读写功能。彩屏详情请点击下边的链接-Color for the 56 2.4-inch TFT color screen with touch screen and SD card reader function. The color details, please click the link below
2.4TFT
- 2.4寸彩屏程序包含触摸,SD卡的源码和资料-2,。4TFT SDcard
MCU_898
- ZLG/SD读写模块V3.0 /*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 目 录 说 明 ****************************************************************************************************/ 1. ZLG_SD读写模块V3.0: ZLG/SD读写模块V3
src_rtt_0.3.4
- AT91SAM7S64移植RT-Thread嵌入式操作系统，完成8bit并口TFTLCD驱动、SD卡驱动（含FATFS）。-RT-Thread 0.3.4 port to AT91SAM7S64 MCU，include 2.8inchLCD driver。
How-To-Setup-on-Raspberry-Pi.txt.tar
- Basic Steps (Detailed below) 1. Install NOOBS. 2. login with ssh. 3. Set the network to static IP Address. 4. Set the hostname to raspbian. 5. Update and upgrade your firmware and software. 6. Increase RAM memory allocation. 7. Insta
proj_SDinfo_000
- Source code of arduino SD communication program. This pogram was registered arduino IDE 1.0.4.
geigao-V7.4
- Much posture, multi-angle, have different light, By matlab code, K-means clustering algorithm based on the PSO.