搜索资源列表
STM32F103X-KEIL-EXAMPLES
- 针对STM32F103系列用keil编写的历程，包括LED,LCD,串口，CAN总线等，下载后用keil运行工程文件，然后仿真即可-STM32F103 series written for the course with keil, including LED, LCD, serial port, CAN bus, and so on, download the file using keil run the project, and then simulation can be
I2CMASTER
- 基于STM32F103的I2C通信代码，对象是AT24C02，也可用于一般的EEPROM通信-I2C-based communication STM32F103 code, the object is AT24C02, the EEPROM can also be used for general communications
CAN
- stm32F103库文件，CAN，C语言描述-stm32F103 library files, CAN, C language descr iption
sample_source_stm32
- STM32F103 example source(ad, dac, usart, dma, etc..)
gcc-stm32
- stm32在gcc编译器下进行开发的一个例子，很简单的点灯，可在万利stm32f10b的板子上跑-An led operation example of stm32 compiled by gcc which can run on Manley stm32f10b board successfully.
stm32F103AND105USB
- 基于STM32F103和105的USB OTG驱动编程，已经调试成功，只需要移植到目标板上修改一下配置就可以-STM32F103 and 105 based on the USB OTG-driven programming, debugging has been successfully ported to the target board need only modify the configuration can be
STM32_CANtx-rx
- 基于stm32f103的can通讯的发送的接收，测试的时候需要两个开发板，连上即可-Receiver based on stm32f103 can communicate sending test requires two development boards connected to
STM32f103_ht1381_OK
- 基于STM32f103的日历时钟芯片HT1381的驱动程序，可以正常运行-Based on STM32f103 calendar clock chip driver HT1381, can run normally
STM32_Stepe-motor
- 基于STM32的4轴步进电机加减速控制全套工程源码，共有两套； 一套是STM32F103的，另外一套是STM32F405的； 可以同时控制4轴步进电机进行加减速； 速率可以达到100K以上； -4-axis stepper motor control acceleration and deceleration based STM32 full project source code, there are two Set is STM32F103 and STM3
can_bootloader
- STM32F103的CAN总线Bootloader源代码。-The source code of CAN bus bootloader for STM32F103.
CAN
- STM32F103单片机实现CAN总线数据是发送与接收-STM32F103 MCU CAN bus data transmission and reception
MR08_wep_adhoc
- 这是我学习Lwip和WIFI协议的工程，WIFI芯片用的是marvell 88w8686，MCU是Stm32f103，有想要学习协议栈开发和WLAN协议的可以下载学习-This is what I learn Lwip and WIFI protocol engineering, WIFI chip using a marvell 88w8686, MCU is Stm32f103, there want to learn the protocol stack development and W
shoubing
- STM32红外遥控编程源代码，需要的可以拿来参考，基于STM32F103系列。-STM32 infrared remote control programming source code, can be used to refer to the need, based on STM32F103 series.
LCD320240
- STM32F103驱动RA8806的320240液晶驱动程序，实验已经可以实现图片，汉字，光标，画线等程序功能，请放心下载！-STM32F103 drive RA8806 of 320,240 LCD driver test can already achieve the picture, characters, cursor, draw lines and other program features, please feel free to download!
Oscilloscope-signal-source
- 用Stm32f103当示波器，具有分析输入波形功能，同时又能输出波形自己花了将近一个月编出。-When using Stm32f103 oscilloscope, with analysis of the input waveform function, at the same time can output waveform spent nearly a month to write themselves.
CORTEX_STM32F103_Keil
- stm32f103 freertos系统源码 keil编译环境工程，测试可以用-stm32f103 freertos system source code keil build environment engineering, testing can be used
STM32F10X-ADC_multi-channel
- 基于STM32F103的ADC1多通道实验，非DMA方式，亲测有效，此文件只配置了3路AD同时输入，有需要的朋友可以通过此文件更改IO口配置，实现更多的ADC通道 -Based on STM32F103 ADC1 multi-channel experiment that haven t used DMA, this file is configured with only 3 way AD input at the same time, if any friend in need can b
printf重定向
- 基于stm32zet6的printf重定向，能在串口上用printf语句显示需要显示的内容(Printf redirection based on stm32zet6 can display the content that needs to be displayed with printf statement on the serial port.)
stm32 MMS8451
- MMA8451三轴加速度计 STM32F103c8t6单片机控制程序，可以设置加速度计量程，±2g、±4g、±8g，但是程序里2g和4g模式下精度很高很准确，8g模式下采集到的数据存在问题，通过串口打印输出，显示单位是g。程序内关键部分已添加注释，希望可以帮到大家。(MMA8451 three axis accelerometer STM32F103c8t6 microcontroller control program, can set the accelerometer range, + 2
stm32+MMS8451 V1.4
- MMA8451 测量三轴加速度信息，三种动态量程可以调，oled显示单位是g，串口输出打印、关键地方已经加好注释，自己可以根据注释更改量程。(MMA8451 measurement of three axis acceleration information, three dynamic range can be adjusted, OLED display unit is g, serial output print, the key place has been added annotati