搜索资源列表
ann
- 介绍了一种基于神经网络白化匹配滤波器的QRS 波检测方法。我们用神经网络白化匹配滤波器来处 理ECG 信号的低频成分, 模拟其非线性及非稳态的特性。处理后的信号中含有ECG 中大部分高频成分, 让其通过 一线性匹配滤波器来检测QRS 波及其位置。对于大噪声的ECG 信号, 在匹配滤波器后加差分滤波, 取平方及滑动 平均等处理, 提高检测正确率。使用这种方法我们对M IT?B IH 心电信号数据库中噪声比较大的105号数据进行的 处理, 检测正确率为9912 。作为对比, 用数字
ADI
- 流体流动与相变传热的数值模拟课程的课堂小作业,ADI算法,采用有线差分法,计算二维平板的流体稳态流动时的热扩散稳态。-Fluid flow and phase change heat transfer numerical simulation of a small classroom course work, ADI algorithm, using the cable difference method to calculate the flat two-dimensional steady-
ADI-to-TDMA
- 基于TDMA算法的ADI算法,同样是流体流动与相变传热的数值模拟课程的课堂小作业,采用有线差分法,计算二维平板的流体稳态流动时的热扩散稳态。-ADI algorithm for TDMA-based algorithm, the same phase change heat transfer and fluid flow numerical simulation of a small classroom course work, the use of wired-difference metho
ADI-with-TDMA
- 流体流动与相变传热的数值模拟课程的课堂小作业,ADI算法,采用有线差分法,计算二维平板的流体稳态流动时的热扩散稳态。-Fluid flow and phase change heat transfer numerical simulation of a small classroom course work, ADI algorithm, using the cable difference method to calculate the flat two-dimensional steady-
chap6
- 求解过程中,由于几何模型发生变化而导致区域网格改变时会出现几何结构的连续性问题。本章中,我们举两个例子——流道中由于不同尺寸孔板引起额外压力损失问题是稳态几何连续性的一个例子。从概念来看,这个问题与第5章贝纳尔问题中通过Rayleigh数进行的变量连续性没什么不同。第二个例子是液体中悬浮的乳胶颗粒的干膜。在这个问题中,考虑了两个移动前缘;一个通过坐标变换,另一个通过光滑界面模型。该技术对于之前模拟该问题采用的移动弱项方法有所改进。-Solving process, due to geometry
WAVEFORCE
- 利用虚拟激励法模拟随机波浪,计算海洋平台的稳态响应-The use of virtual simulation of random wave excitation method to calculate the steady-state response of offshore platforms
energy
- 能源动力系统演化模型模拟程序,演示能源动力系统演化结果,及达到稳态情景-Energy power systems simulation program evolution model, the results demonstrate energy power system evolution, and reaches a steady state scenario
FiberLasersAndAmplifiers
- 这个工具箱提供的稳态分析两掺杂铒和镱的光纤激光器和功放,对实验有好的设计, 通过各种计算和模拟来充分理解不同等参数的影响。-This toolbox provides steady-state analysis of both erbium-doped and ytterbium-doped fiber lasers and amplifiers, allowing good design choices to be made for experiment. Various calcu
laser-resonator
- 用fox-li数值迭代法模拟模拟激光谐振腔的振荡过程并计算最终的稳态分布-Using fox-li iterative numerical simulation simulate laser resonator oscillation process and calculate the final steady-state distribution
work
- MEMS VOA动态性能模拟,分为稳态和动态,模型和实际较为符合。-MEMS VOA SIMULATION
LBE-viscoe
- 用Oldroyd-B模型来数值模拟粘弹性流体,在收缩管道中的稳态流动。-The Oldroyd-B model is used to simulate the viscoelastic fluid, and the resuld of steady flow of the viscoelastic fluid is got.
SPHearr
- 基于SPHSHEAR算法,实现稳态流、瞬态流、湍流模型的数值模拟-Based on SPHSHEAR algorithm, to achieve steady-state flow, transient flow, turbulence model of numerical simulation
rootplot2
- 模拟穿过圆柱介质的光子辐射传输,输出光子时域和稳态分布曲线-Simulation through the cylindrical dielectric photon radiative transfer, the output photon time domain and the steady state distribution curve
dbf
- 能够模拟dfb激光器稳态及其扰动情况下的动力学输出(dynamics of DFB laser)
SteadyHeatNonLinearForStudents
- 一维稳态非线性热传导问题的有限元编程,实现了一维非线性热传导问题的matlab有限元模拟(One dimensional finite element implementation for steady state, nonlinear heat conduction.)
四旋翼无人机
- 四旋翼无人机SIMULINK建模,PSO_SA优化PID参数 reverse.m 作用:将History表中的string形式的key值转换为赋给九个全局变量temp00, ... ,temp08运行sum1.slx,可以直接观察此组参数的波形。 History 作用:映射表,将一组参数(temp00, ..., temp08)映射到这组参数的ITAE指标。 trojectory.m 作用:定义一条路径并进行路径压缩,通过不断向sum.slx传递位置参数,控制无人机运动,并接受无人机
udf
- 二维非稳态传热模拟中有关外界环境温度的UDF代码(UDF Code for External Environmental Temperature in Two-Dimensional Unsteady Heat Transfer Simulation)
three level.m
- 数值模拟三能级原子系统的稳态EIT现象,能修改各项参数对吸收项,相干项,粒子数布局的影响(Numerical simulation of steady-state EIT phenomena in a three-level system)
Lattice Boltzmann Method模拟2维接触角
- 该程序为格子玻尔兹曼方法(LBM)模拟二维的三相接触角,其中BCs.cpp文件为边界条件,Coll.cpp为碰撞算法,Steam.cpp为迁移过程,Error.cpp为计算稳态误差,force.cpp为计算作用力(采用Shan-Chen模型),Initialization.cpp为初始化(可改变初始两相形状),MacVar.cpp为计算宏观量,output.cpp为输出文件(可修改输出格式),源.cpp为控制主函数。