搜索资源列表
newsom123
- 使用自适应逼近的短期负荷预测，为matlab代码，程序较为简单-The use of adaptive approximation of the short-term load forecasting for the matlab code, the program simple
An-Adaptive-Filter-Model-of-Object
- ：针对目标跟踪过程中目标尺度伸缩和姿态形状的变化引起的目标丢失，以及使用单个模型跟踪 机动目标不够理想，提出一种基于SIFT特征的自适应滤波目标跟踪算法。仿真结果表明，该算法在 目标机动时，跟踪性能远优于其它特征匹配算法和多模型算法，而且计算量小，能保证跟踪的实时性。-Abstract：Aim at the lose of target due to scale。invarl’ant，position change and deformation，as welI as dissati
Fuzzy-PI-control-of-PMSM
- 控制系统采用经典的三闭环结构,其中电流环采用id=0的矢量控制策略,速度环采用PI控制,位置环采用模糊PI自适应控制,自适应控制通过Matlab软件编程。文中给出了系统各模块仿真模型的建立方法,并针对工程系统实际参数,进行了负载突加突卸时位置、速度和转矩瞬态过程仿真与分析。结果表明,该系统抗干扰性好,能快速准确地跟踪位置及转速给定。-The control system uses the classic three-loop structure, the current loop id = 0
2_9
- AN ADAPTIVE CONTROLLER BASED ON NEURAL NETWORKS FOR MOTOR-DRIVE LOAD SIMULATOR Shen Dongkai Wang Zhanlin College of Automation Science and Electrical Engineering Beijing University of Aeronautics and Astronautics Beijing 100083, P.R.China r
KRLS
- 核自适应滤波算法krls的matlab程序。已将klms算法弄成函数，加载即可使用。-Nuclear adaptive filtering algorithm krls matlab program. Klms algorithm has inflicted function, load can be used.
TPS09
- Power electronics plays an important role in controlling the grid-connected renewable energy sources. This paper presents a novel adaptive neuro-fuzzy control approach for the renewable interfacing inverter. The main objective is to achieve s
adaptivecontrol
- 基于模糊控制的自适应控制器，能够根据负载的变化动态的调整PID控制器的参数。-Based on fuzzy control adaptive controller, according to changes in the load parameters dynamically adjust PID controller.
Thstribution-Static
- This paper presents the modeling and implementation of a three-phase DSTATCOM (Distribution Static Compensator) using STF (Self Tuning Filter) based IRPT (Instantaneous Reactive Power Theory) control algorithm for power quality improvement. It is
ybgrmyxx
- FMCW调频连续波雷达的测距测角，阐述了负荷预测的应用研究,一些自适应信号处理的算法，多元数据分析的主分量分析投影，包含光伏电池模块、MPPT模块、BOOST模块、逆变模块，是学习PCA特征提取的很好的学习资料。- FMCW frequency modulated continuous wave radar range and angular measurements, It describes the application of load forecasting, Some adaptive
qifumfec
- 实现串口的数据采集，一些自适应信号处理的算法，PLS部分最小二乘工具箱,阐述了负荷预测的应用研究,代码里有很完整的注释和解释，进行波形数据分析。-Achieve serial data acquisition, Some adaptive signal processing algorithms, PLS PLS toolbox, It describes the application of load forecasting, Code, there are very complete not
icummjxq
- 验证可用，应用小区域方差对比，程序简单，是机器学习的例程，阐述了负荷预测的应用研究,一些自适应信号处理的算法，最终的权值矩阵就是滤波器的系数，基于kaiser窗的双谱线插值FFT谐波分析。- Verification is available, Application of small area variance comparison, simple procedures, Machine learning routines, It describes the application of lo
erjzmbpb
- 采用累计贡献率的方法，阐述了负荷预测的应用研究,一些自适应信号处理的算法，采用加权网络中节点强度和权重都是幂率分布的模型，现代信号处理中谱估计在matlab中的使用，基于负熵最大的独立分量分析，使用高阶累积量对MPSK信号进行调制识别，包括回归分析和概率统计。- The method of cumulative contribution rate It describes the application of load forecasting, Some adaptive signal proc
fyzfnbsh
- 用于特征降维，特征融合，相关分析等,本程序的性能已经超过其他算法，有详细的注释，一些自适应信号处理的算法，基于SVPWM的三电平逆变的matlab仿真，是信号处理的基础，阐述了负荷预测的应用研究。- For feature reduction, feature fusion, correlation analysis, This program has exceeded the performance of other algorithms, There are detailed notes,
hanfun
- 一些自适应信号处理的算法，进行逐步线性回归，阐述了负荷预测的应用研究。- Some adaptive signal processing algorithms, Stepwise linear regression, It describes the application of load forecasting.
jengyou_v26
- IMC-PID是利用内模控制原理来对PID参数进行计算，一些自适应信号处理的算法，阐述了负荷预测的应用研究。- The IMC- PID is using the internal model control principle for PID parameters is calculated, Some adaptive signal processing algorithms, It describes the application of load forecasting.
V2I4_IJERTV2IS4962
- Mitigation Of Voltage Sag And Current Harmonic Elimination Using Reference Signal Generation Method Based On UPQC. This paper proposes a reference signal generation method for the UPQC adopted to compensate both current and voltage quality problems
AdaptiveMedianFilter_MATLAB_code
- 采用MATLAB设计的自适应滤波器，可以滤除非线性负载的谐波(The adaptive filter designed by MATLAB can filter the harmonic of nonlinear load)
PEOCO
- One of the challenge in islanding operation is to maintain frequency stability when generation is less than demand. This paper presents a new Under-Frequency Load shedding scheme for an islanded distribution network. The scheme is based on an ada
GP in power system
- 利用遗传程序设计建立电力系统的负荷模型，无需像传统方法一样预先确定具体的模型结构，它能根据输入输出数据直接演化出变量间的函数关系，并且能够一次性的同时确定函数的结构形式和参数，使得模型的生成过程趋于智能化、自动化，解决了负荷建模工作中长期困扰的模型辨识问题。(Genetic Programming(GP) is a new evolutionary algorithm based on genetic algorithm,which has self-adaptive,self-organizi