搜索资源列表
chuankoumessage
- 这个函数是用来处理串口消息事件的，如每当串口接收到数据，就会产生一个串口接收数据缓冲区中有字符的消息事件，我们刚才添加的函数就会执行，我们在OnComm()函数加入相应的处理代码就能实现自已想要的功能了。-this function is used to handle serial news events, whenever serial data received, will have a serial port receiving data buffer characters are ne
FTT
- 用VC++实现串口通信，然后进行FFT变换，最后显示信号的频域信息和时域信息。
uart0
- 串口中间件，实现数据的读与写！在嵌入式LPC2210下编写
uart_ceshidaima
- 这是NIOS串口程序，有中断实现和循环实现，可以参考下-This is the NIOS serial procedures, interrupt and cycle to achieve, you can refer to the following
character_youguanxifuxianhi
- 这是NIOS串口程序，有中断实现和循环实现，可以参考下-This is the NIOS serial procedures, interrupt and cycle to achieve, you can refer to the following
choukou
- 用51的串口实现密码功能，上位机通过串口发送密码给下位机，下位机判断是否为设定的密码-Password function with 51 serial ports, host computer through the serial port to send the password to the next bit machine, the next bit machine to determine whether the set password
pc_danpianji
- 利用Keil C51实现单片机与PC机串口通信-Keil C51 MCU and PC serial communication
12864串口液晶显示程序
- 通过编程将信息显示到液晶屏幕上，程序的硬件平台简单，实现方便，而且显示效果好！
SDcard-TFT-and-series-trans
- 实现了使用STM32系列单片机进行SD卡TFT、串口接收等方面的相关功能。-Achieved using the STM32 family of microcontrollers SD card TFT, serial receiver and other aspects related functions.
serialDemo
- 串并口通信程序，利用MFC控件实现，用于底层传输-i do not know
jni
- 串口HAL文件，可实现发送接收，使用mmm编译成so文件，直接推送。-Serial HAL files, enabling transmission and reception, so files compiled using mmm, Direct Push.
notein_vega_new
- 程序是有QT编写的收钞模块的dll库，通过com编程实现串口通讯-Program is written with QT chao module DLL library, through the com programming to realize serial communication
V0.2
- 可以通过串口1发送指令控制4个IO口，以实现小车8个方向的行驶，带差速转弯功能(You can control 4 IO ports by sending 1 commands through the serial port, so that the car can drive in 8 directions, with differential turn function.)
CORX-NFC_读写标签上位机源码（C# VS2012）
- 读写标签源码，可二次开发，是通过 PN532NFC模块串口连接电脑实现上位机操作对NFC卡读写操作。(Read-write tag source code, can be redeveloped, through the PN532NFC module serial port connected to the computer to achieve the upper computer operation on the NFC card read-write operation.)