搜索资源列表
模拟IIC
- 使用LPT口，模拟IIC，界面友好，使用方便，不失为一个硬件调试的好帮手！ 亦可透过IIC实现双机互连，因为IIC支持主从模式:-)
STM32 模拟 IIC 驱动 Maxim 加速度传感器 MXC6202 代码
- 工程文件为编译环境 Keil MDK4 ST2.0的库,iic_driver.c是模拟IIC代码文件并读出加速度计在X，Y轴上的初始值，没有经过数据处理成加速度的值。 led.c数码管显示程序文件，注释之后的代码是通过一个数码管依次显示X，Y轴上总共8位初始值，把注释去掉之后是通过595锁存8的数码管同时显示加速度计初始值。 main.c是主函数.
MSP430采用模拟IIC操作读TMP275温度传感器的程序
- MSP430采用模拟IIC操作读TMP275温度传感器的程序。包括MSP430的初始化、模拟IIC及TMP275的使用,IIC operation MSP430 analog TMP275 temperature sensor reading process. Including the initialization MSP430, simulate the use of IIC and TMP275
IIC
- 8051单片机模拟IIC总线驱动程序。非常适合初学者-8051 simulation IIC bus driver. Very suitable for beginners
IIC
- 基于PIC18F4520的CAT24C021带看门狗EEPROM的读写，采用IO口模拟IIC总线，内容经测试，完全可使用-Based on the PIC18F4520 with CAT24C021 watchdog EEPROM reading and writing, using Analog IO I IIC bus, the contents have been tested, can be used completely
IIC
- 模拟IIC总线的C程序（软件延时产生SCL脉冲）-Simulation of C procedures IIC bus
rtc_8563
- 在ixp425平台上通过GPIO模拟IIC总线，驱动实时时钟芯片的驱动-Ixp425 platform in analog through the IIC bus GPIO, drivers drive real-time clock chip
9-2
- MSP430系列单片机实用C语言程序设计软件模拟IIC总线读写24C02程序-MSP430 Microcontroller C Programming utility software simulation program IIC bus read and write 24C02
MSP430analgIICbusprogam
- MSP430模拟IIC总线程序，我调了一个星期才调出来的-MSP430 analog IIC bus program, a week before I stress out of tune
SAA7113_init
- GPIO模拟IIC，SAA7113初始化-Analog IIC, SAA7113 Initialization
IIC
- MSP430模拟iic总线，驱动ZLG7290程序-MSP430 analog iic bus, the driver ZLG7290 program
8563T_AT917S64
- RTC PCF8563T AT91SAM7S64驱动 模拟IIC总线通信-RTC PCF8563T AT91SAM7S64 IIC
IIC
- 用单片机 io口模拟 IIC 接口时序 极易实现类封装。-It is a design to simulate IIC interfa timing based on single chip. And it is easy to pack them into a class.
iic
- 软件模拟IIC的接口程序,此程序用C语言编写而成-IIC interface software simulation program, this program made with C language
基于stm32的MPU6050收读取和模拟IIC
- 基于stm32的MPU6050收读取和模拟IIC 陀螺仪初始化配置，陀螺仪三轴加速度算法处理，俯仰角，航向角等四轴飞行器参数读取与显示。(MPU6050 receive, read, and simulate IIC based on stm32 Gyroscope initialization configuration, gyroscope three axis acceleration algorithm, pitch angle, heading angle and other fo
STM32 IO口模拟IIC接口程序
- 本程序基于stm32单片机 的io口模拟IIC,STM32单片机硬件复杂且不好用，使用本程序简洁明了。(This procedure is based on the STM32 microcontroller IO port analog IIC, STM32 microcontroller hardware complex and difficult to use, the use of this program is simple and clear.)
IIC
- MCU：R5F10268 编译环境：Cs+ 软件模拟IIC通讯，应用程序与驱动程序分开，可以移植到其他单片机上。已经测试验证过。(MCU: R5F10268 compile environment: Cs + Software simulation of IIC communication, application and the driver separately, can be transplanted to other MCU.Has the validation test)
mpu6050-模拟iic
- 基于STM32的，用模拟IIC通信，来读取MPU6050的数据。(Based on STM32, the data of the MPU6050 is read by using the analog IIC communication.)
stm32103模拟0.96寸OLED驱动
- 使用stm32模拟IIC功能解决部分由于硬件问题无法驱动OLED的问题(Using STM32 to simulate the IIC function to solve the problem that the part of the OLED cannot be driven because of the hardware problem)
单片机普通IO口模拟IIC多机通信-本人已测试通过
- 关于iic通讯，主从机iic通信，可双向通信，模拟iic(Analog IIC dual computer communication)