搜索资源列表
STM32+EXTI.rar
- 本例展示了如何使用嵌套中断向量控制器（Nested Vectored Interrupt Controller）来设置IRQ通道。 把3个计时器（TIM2，3，4）设置为在每一个计数器更新事项（counter update event）产生中断。这三个计时器都与各自对应的更新IRQ通道联系起来，并设置他们的中断优先级，TIM2为0，TIM4为2。 在他们各自的中断中：TIM2每1秒翻转一次PC.06的状态；TIM3每2秒翻转一次PC.07的状态；TIM4每3秒翻转一次PC.08的状态
STM32-EXTI-and-Key
- STM32 用外部中断做的键盘，使用外部中断线0 13和15，而且键盘具有优先级，功能较全面-STM32 to do with the external keyboard interrupt, external interrupt lines 013 and 15, and the keyboard has a priority, features a more comprehensive
ST32exti
- ST32 基于（英蓓特）STM32V100的EXTI程序 This example shows how to configure an external interrupt line. In this example, the EXTI line 9 is configured to generate an interrupt on each falling edge. In the interrupt routine a led connected to PC.06 is to
EXTI
- This example shows how to configure an external interrupt line-THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. * AS A RESULT, STMICROEL
EXTI
- 内含对STM32外部中断的基础介绍以及完整的设置外部中断的源码和解说-External interrupt for STM32 contains basic introduction and a complete set of external interrupt source
STM32-EXTI
- 使用STM32库编写的外部中断程序，程序已经在开发板上验证可行性。-This is the code while had been test on a boad.
main
- stm32f4 discovery usart and exti example. press the user button and send a character via usart
EXT_interrupt4
- This example shows how to configure external interrupt lines. In this example, the EXTI Line0 (connected to PA0 pin) is configured to generate an interrupt on each rising edge. In the interrupt routine a led connected to PD.12 pin is toggled.-T
exti
- 基于STM32的外中断编程，自己编写的一个简单程序，简洁明了，适合初学者学习。-Based on the STM32 outside interrupt programming, a simple program I have written, concise, and suitable for beginners to learn.
EXTI
- ARM中断方式LED灯显示程序源代码，调用函数库，很好的例程-The ARM interrupt LED lights to show programming source code, call the library, a good routine
EXTI
- EXTI外部按键中断(MDK)关于stm32的程序-a program about EXTI (Pressing the key and the LED is lighted)
Keil_EXTI
- This example shows how to configure external interrupt lines. In this example, the EXTI Line0 (connected to PA0 pin) is configured to generate an interrupt on each rising edge. In the interrupt routine a led connected to PD.12 pin is toggled.-T
STM32-for-motor-control-driver
- 添加stm32f411xe设备支持. 提高霍尔延迟与时间基本实现,添加一个新的宏观__hal_gpio_exti_generate_swit()管理软件生成选定的完全中断,功能重组更新，取决于每个STM32F4设备支持的功能.在l_pwr_enterstandbymode()不清楚唤醒旗（WUF），它需要被清除的应用水平之前调用这个函数.添加新的宏控制CTS和RTS。 -Add support of STM32F411xE devices Enhance HAL delay and
EXTI
- 两个按键控制彩灯的红、绿灯反转，按一下KEY1 红灯反转一次，按一下KEY2,绿灯反转一次-Two buttons to control lights red, green reverse, click the KEY1 red inverted once, click KEY2, reversing a green light
IR_RS232
- 红外遥控代码,需要重新配置SysTick的中断优先级为最高，要不然SysTick延时中断抢占不了IO EXTI中断,或者当你用其他定时器做延时的时候，要配置定时器的优先级高于IO EXTI中断的优先级.(Reconfiguration of SysTick interrupts the highest priority, otherwise SysTick delay interrupts cannot preempt IO EXTI interrupts * because the defa