搜索资源列表
can--tiaoshi
- 系统can地址为550,用于can系统测试,应用T0定时器每隔1s向can总线发送一组数据:数据长度为8个字节, 首字节为05H,第二个字节为累加变量,每秒钟数值增加1,-system can address 550 for the test system can, Application T0 1s to every timer can send a bus of data : data length of 8 bytes the first byte of 05H, the s
t0
- 流水灯 使用定时器控制，使发光二极管按照D8－D1，每隔1S灭一个的顺序循-water timer to control the use of lights, light emitting diodes in accordance with the D8-D1, every 1S anti through a sequence
定时器1
- ;T0为0.1秒计时，T1为外部中断计数，根据中断次数实现1秒的计时时间， ;然后控制P17以1秒为周期翻转。 ;P17接LED,P10接T1脚
time
- 三位数码管正计时程序，单片机T0定时器计时，Keil环境下的c语言程序。具有Proteus的仿真-The three digital control is time-process, single-chip timing T0 timer, Keil environment c language program. Simulation with Proteus
jsq1602xg
- 这是用AT89S52和1602液晶屏设计的计时器，利用T0定时器和外部中断功能，显示时间，可多次次数。-This is the AT89S52 and 1602 with LCD timer designed using T0 timer and external interrupt function, showing time, can be many times the number.
T0
- 51单片机程序中断与定时器的例程 用于初学51单片机程序-51danpianjichengxu
yijingxianshi
- 自己编写的一个应用于1602液晶的秒表小程序，使用了T0定时器功能，大家喜欢的可以-I have written a stopwatch used in small liquid crystal 1602, the use of the T0 timer function, we can look at like
T0
- 基于LPC2210上采用定时器来用软件查询中断-LPC2210 based on software used to query the timer interrupt
zhongduanfangbo
- 中断例子，用于产生一占空比可调的方波。用T0定时器。-Interruption of examples used to generate a square wave with adjustable duty cycle. By T0 timer.
T0offenpin
- 分频器的设计。基于M16.用T0定时器。有proteus仿真-Divider design. Based on the M16. By T0 timer. There proteus simulation
PWM
- 用T0定时器控制输出PWM，占空比10 到80 可按键调节，输出频率可用按键调节，1KHZ,5KHZ,7KHZ，三个之间变化-T0 timer control output using PWM, duty cycle 10 to 80 of buttons adjust the output frequency can be adjusted keys, 1KHZ, 5KHZ, 7KHZ, varied between three
T0-CTC
- 利用定时器t0产生占空比为50 的PWM方波-The use of timer t0 generate 50 duty cycle of the PWM square wave
T0-T1-timer-C51-microcontroller
- 本文主是对 C51单片机 T0 T1 计时器的应用，开了两个定时器-T0 T1 timer C51 microcontroller
T0-TIFR-LED
- T0查询TIFR定时控制LED AVR单片机程序教程 T0定时器设计 控制LED亮和灭。-T0 query TIFR timing control LED AVR microcontroller program design tutorials T0 timer control LED turn on and off.
T0
- ATmeg128单片机开发板上带的T0定时器的源程序，写的比较详细的，注释也是比较好的-T0 timer ATmeg128 microcontroller development board with the program, written in more detail, and also a better note
ad-adn-t0
- 开始入门学习AVR单片机的功能应用，AD转换盒T0定时器-start enter AVR study ,AD trAND T0
DSQ+流水灯在T0中断里
- 把流水灯跟数码管刷新放到T0中断里，写成并行程序结构，与主函数里的程序不冲突(The flow lamp and the digital tube refresh in the T0 interrupt, written in parallel program structure, and the main function of the program does not conflict.)
T01602.X
- 在16F877A芯片上用T0定时器控制时间，在1602液晶上实现数字依次累加(The T0 timer is used to control the time on the 16F877A chip, and the number is accumulated sequentially on the 1602 LCD.)
定时器门铃设计
- 关键字：keil，51单片机，C语言，定时器T0实现。 Keyword:keil,51 Single Chip Microcomputer, C Language, Timer T0 Implementation.
流水灯高低4位交替闪烁定时器控制
- 定时器控制流水灯高低4位交替闪烁 中断方式T0模式2，内有Keil C源文件，已编译通过；内有Proteus仿真文件(DSN)，已仿真通过。(Timer control flow light high and low 4-bit alternate flashing interrupt mode t0 mode 2, with keil c source file inside, compiled; proteus simulation file (DSN) inside, simulated.