搜索资源列表
progisp166
- 支持所有的avr芯片的编程，支持AT89S51,AT89S52 支持自定义并口下载编程器 支持自定义串口的下载编程器 支持usbASP编程器 支持并口的并行编程器 支持usbProg编程器(本工作室开发，见下面的图纸) 支持自定义编程芯片 支持自定义编程熔丝信息提示信息 支持usbProg的在线升级(通过usb口) 支持usbProg-C实现脱机下载 绿色软件，无需安装，占用资源少 支持自定义汉化信息提示 支持工程管理--可以将所有的配置数据与编
Atmel-avr-Mouse-Source
- ATMEL 2007 Readme file to compile AT90usb162 firmware demonstration with avrGCC (winavr 20070525 revision). Since this version, AT90usb162 is supported by avrGCC. If you are using the Winavr project file (.aps), your project must be placed in the C:\
avr_usb
- avr单片机里的usb通信程序开发源代码,是某人的本科毕业设计,里面附有毕业论文.-avr Single Chip usb communication procedures in the development of source code, is a person s undergraduate graduation project, which bearing thesis.
avr309
- avr的usb开发源代码 usb-RS232转换-avr-usb309 for ATmega8 or ATtiny2313 RS232 converter
usbboothit
- usbbootHIT包含usb驱动源码，用来在avr单片机上实现usb下载程序-This directory contains the usb firmware only. Copy it as-is to your own project and add your own version of "usbconfig.h". A template for your own "usbconfig.h" can be found in "usbconfig-prototype.h" in t
LUFA090510
- LUFA (Lightweight usb Framework for avrs) is my first foray into the world of usb. Originally based on the AT90usbKEY from Atmel, it is an open-source, driver for the usb-enabled AT90usbXXX avr microcontroller series, released under the permissive MI
usb_Speaker
- This project built on avr. The gold of this project has to have a second voice out line from PC.
sd-reader_FAT
- SD卡读卡器开发项目，实现了FAT文件系统。项目中使用的为avr单片机，包括硬件原理图和整套软件源代码。软件包括sd卡底层驱动代码＋FAT文件系统代码+应用层代码。是不是好东东，大家看了就知道。-SD card reader development project, to achieve the FAT file system. project avr microcontroller for use, including the hardware schematics and software
avr_usb
- avr usb example project
2011IgorPlugusb
- 用avr做电脑遥控器的免费调试程序，下载即可使用，先做好固件，插在PC上-Purpose of this article is to inform readers about implementation usb interface into singlechip microcontroller, which this interface directly not supports. Simply: implementation usb interface on firmware level (
usb-programmer
- Full project programmer usb-avr with schematic and sources
Canbus_v3
- The purpose of this project is a simple and easy to use usb <> CAN bus interface. Heart of the circuit is an Atmel avr ATmega162 microcontroller which controls the Communication between FTDI FT245BM usb to parallel converter and Philips
avr_usb_Joystick_Code
- avr usb project to use usb port