搜索资源列表
3．GPIO输出实验－流水灯实验
- EasyARM2131开发板源码之一----------- 3．GPIO输出实验－流水灯实验-EasyARM2131 one source development board ----------- 3. GPIO output experiment - water Lights
基于ARM CORTEX M3 流水灯代码
- 基于ARM CORTEX M3 流水灯代码 能用 要根据STM3210X的型号来定义GPIO即可
MSP430
- msp430,GPIO程序，通过控制点亮一个灯来学会launchpad的控制
GPIO.rar
- 嵌入式I/O口实验程序，含有S3C2410的部分初始化，实现LED灯的暗和灭,Embedded I/O port the experimental procedure, which contains part of S3C2410 initialization, the realization of the dark and the LED lights out
LPC1114_timer16_32
- 通过LPC1114的32位定时器和16位定时器实现LED灯闪烁的例子-By LPC1114 32-bit timer and 16-bit timer, an example of LED lights blinking
F2812_Gpio
- F2812 GPIO控制LED灯亮1s，灭1s。（CCS3.3开发环境）-F2812 GPIO control LED lights 1s, OFF 1s. (CCS3.3 Development Environment)
Ch03-GPIO(Light)_C
- 飞思卡尔AW60单片机的样例程序（小灯）-Fly think of Carle AW60 MCU sample program ( lamp )
1.GPIO
- STM32的入门实验，是关于stm32IO口操作的一个程序，实现了闪烁流水灯-Introduction to the STM32 experiments on stm32IO mouth-operated a program to achieve the flashing light water
gpio
- dm6467中字符驱动模块，用于驱动I/O口小灯-dm6467 characters in the driver module, used to drive I/O port of small light
gpio-test
- 针对嵌入式开发板上面的LED灯进行编程控制，实现LED灯的闪烁，开光。需要用到内核态函数，可以参考修改，实现各式各样的显示要求！-Development board for embedded LED lights above program control, the realization of LED flashing lights, the light. Needed core state function, can be edited to achieve a wide range of
gpio-test
- 1、将makefile中的 CROSS =/usr/local/arm/2.95.3/bin/arm-linux- CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include CFLAGS+=-I/usr/local/src/2.4.18-rmk7/include/linux CFLAGS+=-I/usr/local/arm/2.95.3/arm-linux/include 路径改为你宿主机上的。 2、#make，来编译驱动模块。 3、
Gpio
- gpio口显示程序，LEN灯由软件程序来控制，间断闪烁或者流水式闪烁。-I show gpio procedures, LEN light by the software program to control water-type intermittent flicker or flashing.
GPIO-deng
- LPC2131 实现流水灯实验，proteus里面实现-LPC2131 experimental realization of light water, proteus which to achieve
GPIO
- stm32单片机点亮一个灯，对初学者很重要-stm32 microcontroller to light a lamp, is very important for beginners
Freescale FRDM-KL02Z GPIO 流水灯
- 使用 Freescale 之 Cortex-M0+ 的 ARM（FRDM-KL02Z）开发板做个 GPIO 的流水灯，于 IAR 的 IDE 环境编译，适合初学者入门最佳的首选！
gpio
- 基于DSP2812，使用GPIO的引脚来控制LED灯闪烁。即控制XF引脚高低电平不断变化。(Based on the DSP2812, the GPIO pin is used to control the LED flashes. The XF pin is constantly changing between high and low levels.)
GPIO
- 基于STM32F407的实现一个运行灯闪烁。(implementation of a running light flashing based on STM32F407)
STM8S103F3GPIO输出_流水灯控制___Lib
- STM8S103F3GPIO输出_流水灯控制LED(The output of the STM8S103F3GPIO _ light water control ___Lib)
YSF1_HAL-002. GPIO-流水灯
- stm32 流水灯的设计 制作 程序 内容详细 能够帮助初学者 更易理解(this is about app for stm32,it's very detailed.so go to learn.)
GPIO
- 使用stm32的gpio的引脚5通过中断法最终实现led灯的点亮。(Use the STM32 pin 5 to light the LED lamp.)