搜索资源列表
4ms5534
- ms5534气压传感器程序平台stm32单片-ms5534-chip pressure sensor process platform stm32
stm32f10x_rtc
- 基于Cortex M3内核的STM32系列RTC实时时钟模块例程-Cortex M3 core-based STM32 family of real-time clock module RTC routines
3.3V12864
- 血压手臂控制代码包括 电磁阀控制 液晶屏显示-Arm blood pressure control code
ms5534
- ms5534气压传感器程序 平台 stm32单片机 -ms5534 pressure sensor process platform stm32 SCM
project_MS5561
- 气压传感器MS5561的驱动程序，带计算和校正，控制器为STM32，使用Ride7开发环境，固件库使用2.0版本-MS5561 pressure sensor drivers, with calculation and correction, the controller for the STM32, the use Ride7 development environment, using the 2.0 version firmware library
STM32_AHRS_WorkDir
- 这是我从淘宝买的一套很不错的IMU（姿态测量单元）的学习套件，对与初学者来说，很好理解，STM32F103主控制器，集成了MPU-6050（集成3轴陀螺仪和3轴加速器）、HMC5883L（3轴地磁传感器）、BPM085（气压高度计、该传感器在高线性模式下，分辨率为0.03hPa、0.25米，可以满足机器人室内爬楼梯的的高度检测）、STM32F103T8 （32-bit ARM CortexM3处理器运行在72M时钟）-This is a very good buy from Taobao IMU
mms5534s
- ms5534气压传感器程序 平平台 stm32单片机可直接使用。 -ms5534 pressure sensor program level platform stm32 microcontroller can be used directly.
STM32-mcu
- 用于stm32单片机测温湿度、气压、光照的程序，各模块独立，液晶显示。-Temperature humidity, pressure, light program for stm32 microcontroller, each module is independent of the LCD.
GY-87_STM32
- 是GY-87模块的stm32测试程序，串口输出温度压强 陀螺仪 加速度 温度 指南针的数据-GY-87 module the stm32 test procedures, data serial output temperature and pressure gyroscope acceleration temperature compass
STM32
- 项目为碱式电解水的项目工程，用STM32开发，包含电极电压测量，氢气压力测量，水温测量，以及可再生干燥控制模块-Project is alkali type of electrolysis of water project, using STM32 development, contains the electrode voltage measurement, hydrogen pressure measurement, temperature measurement, and renewabl
STM32-project
- STM32开发的高浓度化学制氢机项目，包含温度检测，压力检测，液位检测-STM32 development project of high concentration chemical hydrogen production machine, including temperature testing, pressure testing, liquid level detection and so on
stm32-bmp085
- stm32 bmp085气压读取oled显示，工程文件，可直接使用-stm32 bmp085 pressure reading oled display, the project file can be used directly
stm32+hx711串口
- stm32芯片和HX711压力传感器串口调试试验(STM32 chip and HX711 pressure sensor serial debugging test)
MS5611 LCD显示 串口输出原始数据
- STM32驱动MS5611读取温度气压值，并在LCD屏显示。(STM32 drive MS5611 to read temperature, air pressure, and display in the LCD screen.)
ADC+DMA+FATFS
- 利用DMA模式进行多通道ADC采集并写入SD卡的txt文件。适用于温湿度、压力变送器等。(Use DMA mode for multi-channel ADC acquisition and write SD card TXT file. Suitable for temperature, humidity, pressure transmitter, etc..)
dai_ma
- 在A8上建立服务器，利用QT建立客户端，两者通过TCP/IP协议进行通讯。STM32通过BMP180、BH1750传感器获得温度，大气压强，光强等参数。通过串口通信将这些参数传给服务器，服务器通过数据分析判断是否通过蜂鸣器进行报警。同时将这些参数传给客户端用来实时显示。客户端可以控制服务器报警程序的开始和停止。注：A8上运行linux系统！！！(Set up the server on A8 and use QT to set up the client, which communicates
MS5803
- 根据数据手册写的MS5803压力传感器的程序，因为我是看原子的资料学的STM32，所以有他的system文件夹(According to the MS5803 pressure sensor program written in the data handbook, because I'm a STM32 for atomic data, so I have his system folder.)
DHT11,BMP180组合
- 采集温湿度气压加显示到显示屏上，采用STM32(Collecting temperature and humidity pressure to display, using STM32)
STM32
- 采集温湿度传感器，烟雾传感器，压力传感器数据(Collect data of temperature and humidity sensor, smoke sensor and pressure sensor.)
stm32_znsh
- 显示时间温湿度，测量心跳血压，步数米数，设置闹钟蓝牙连接(Display time, temperature and humidity, measure heart rate and blood pressure, step number of meters, set the Bluetooth connection of alarm clock)