搜索资源列表
STM32F103 UCOS-II2.86 UCGUI3.90 UCFS 移植开发包
- STM32F103 UCOS-II2.86 UCGUI3.90 UCFS 移植开发包 基于IAR5.0平台工程文件 下载直接编译 开通了5个任务
STM32F103-UCOS.rar
- 针对STM32F103的UCOS移植，支持RealView MAK及IAR开发环境,UCOS for the STM32F103 transplantation, support for RealView MAK and IAR development environment
ucos-iii-to-stm32
- keil工程下uCOS-III在stm32f103上的移植的源代码，该程序可以再103 和107 芯片上运行成功运行-uCOS-III on stm32f103, keil project transplant source code, the program can be run on the 103 and 107 chips run successfully
STM32F103ucOS-II
- STM32F103的ucOS-II 移植好的工程。项目可以直接编译、调试，没有错误和警告，注释详尽。ST的Cortex-M3内核，在UCOS-II中建立两个任务，分别以1s和2s点亮熄灭两个LED。-The ucOS-II transplantation STM32F103 good works. Project can compile, debug, no errors and warnings, detailed notes. ST' s Cortex-M3 core, in UCOS-II
16_ucos
- STM32F103系列单片机的UCOS的移植底层库，具体的移植可以参见底层驱动-SCM Series STM32F103 transplant UCOS the bottom of the Treasury, the specific transplantation can see the bottom of drive
uCOS_DEMO_for_i9320_stm32
- 使用STM32F103、ILI9320移植的ucGUI3.90+ucOS2.86嵌入式图形界面操作系统，使用Keil MDK3.50 + J-Link调试。-The use of STM32F103, ILI9320 transplant ucGUI3.90+ ucOS2.86 embedded graphical interface operating system, use the Keil MDK3.50+ J-Link debugging.
stm32_fat_sd_ini
- 单片机STM32F103，环境KEIL ARM，系统UCOS，功能： 1 - 移植了网络上一份开源的文件系统 2 - *.ini文件在单片机上的读写操作-SCM STM32F103, environment, KEIL ARM, the system UCOS, function: 1- transplanted to a source on the network file system 2-*. ini file read and write operations on the MC
uCOS-II_V286
- uCOS-II v2.86 在 STM32F103 上的移植-uCOS-II v2.86 in STM32F103 Porting
UCOSCII
- 1、UCOS-II在STM32中的移植 2、ucos-ii中文书(邵贝贝) .rar 3、STM32F103在UCOSCII上的应用-1, UCOS-II in the transplant STM32 2, ucos-ii Chinese books (Shao Beibei). Rar 3, STM32F103 the application in the UCOSCII
STM32F103_ucos2.83
- uCOS-II在STM32F103上的移植-uCOS-II in the transplant STM32F103
stm32PuCOSPuCGUI(FSMC)
- uCOS-II在stm32F103上的移植-uCOS-II in stm32F103 Porting
ucos
- 基于STM32F103移植的UCOS II 点亮两个led-UCOS II based STM32F103 transplantation two led lights
uCOS-III-model
- 将UCOS-III移植到STM32平台，编译环境为KEIL。里面包含完整工程，可以在STM32F103开发板上运行。-UCOS-III will be ported to the STM32 platform, the compiler environment KEIL，Which contains the complete engineering, can run on the STM32F103 development board.
STM32F103
- 在STM32F103移植UCOS，通过LWS-UM-BTM430蓝牙模块发送两路UART数据-In the transplantation of STM32F103 UCOS, through the LWS-UM-BTM430 Bluetooth module to send two UART data
uCOS-II-For-STM32F1
- STM32F103移植UCOS—II操作系统-STM32F103 transplant UCOS-II operating system
stm32f103rbt6_lite
- STM32软件开发，uart驱动，i2c驱动，spi驱动，ad驱动，rx8025驱动，rtc驱动，wdg驱动，ucos-iii移植。(STM32 software development, UART driver, I2C driver, SPI driver, ad driver, rx8025 driver, RTC driver, WDG driver, ucos-iii transplantation.)
ucos-ii的移植文档
- stm32f103移植成功文档，仅供学习。(STM32F103 successful transplantation document, for learning only)
obd_soft
- 看到平台上移植真正的代码都不好，这边自己花10分钟移植一个给大家分享下(It's not good to see the real code transplanted on the platform. Here you take 10 minutes to transplant it to share with you)
高级例程-基于MINI 板的UCOS 创建2个任务
- STM32F103跑了一个UCOS代码，供需要移植系统的同学(STM32F103c8t6,ucos,two task)
2.带库移植模板
- ucos iii移植到STM32F103C8T6单片机上，库用的是CMSIS。文件中不包含ucos iii的库，需要自己下载(UCOS III is transplanted to STM32F103C8T6 MCU, and CMSIS is used in the library. The file does not contain a library of UCOS III, which needs to be downloaded by yourself.)