资源列表
mygpio
- should use the general purpose input/output (GPIO) interface of the XScale architecture. Your module mygpio.ko should implement a counter operating at 1Hz-a kernel module to interface with the buttons and LEDs that connect to the soldered headers
lcd
- lcd测试程序，默认打开fb0，并用不同颜色刷屏，分辨率是800*480-lcd test program, the default open fb0, with different colors scraper. Resolution is 800* 480
adc
- adc模块的驱动和测试程序，在根文件系统下insmod后运行测试程序即可-The ADC module driver and test procedures, test procedures can run insmod in the root file system after
buttons
- s5pv210 的按键驱动，共8个按键，已全部初始化-S5pv210 key driver, a total of 8 keys
dualram
- 双口RAM驱动程序，对于基于ARM 板子的嵌入式linux开发者，使用到双口RAM，可以在此驱动源码上修改成自己需要的。-Dual-port RAM driver board for ARM-based embedded linux developer, using the dual-port RAM, you can modify the source code in this drive into their needs.
s3c6410-irq-drive
- 基于arm三星s3c6410红外驱动程序源代码！-s3c6410 irq drive
bus
- pci总线驱动，关于总线类型，注册等驱动-pci bus driver
dmar
- pci dmar 是关于直接存储驱动编程方面的程序-pci dmar drivers
hotplug
- 有关pci ，热插拔事件驱动编程程序文件-pci hotplug
htirq
- 关于pci设备中断驱动程序编程文件，处理中断事件-pci irq
intel-iommu
- 关于 intel平台下的io mmu驱动编程程序，负责io接口的mmu的控制-pci iommu
fs210_wdt
- linux驱动编程，fs210下的看门狗驱动的实现和测试程序。-inux-driven programming, fs210 the watchdog driver implementation and test procedures.