资源列表
at24c02
- 利用I2C设备驱动框架实现AT24C02的驱动，详细讲述了如何如何注册混杂设备，如何在linux内核分离的思想下将设备与driver匹配，调用probe函数-Utilizes an I2C device driver framework achieve AT24C02 driver, describes in detail how to how to register the hybrid device, how under the idea of separation of the Linux
LED
- 点亮P1口的一个LED灯 该程序是单片机学习中最简单最基础的， 通过程序了解如何控制端口的高低电平-A leds light up P1 mouth The program is the basis of a microcontroller learning one of the most simple, Through the application to know how to control the high and low level of port
sasken-sim
- sasken公司sim卡驱动，对sim卡感兴趣可以参考一下-sasken sim driver
usb
- 这个是linux 下usb接口的代码，很实用，一定要好好利用，学习接口基础做起-This is the code under linux usb interface is used, be sure to take advantage of
gpio
- AT91SAM9263-EK的驱动编程，控制GPS GSM模块的引脚才高低电平-AT91SAM9263- EK driver programming, control GPS GSM module pin to high and low level
dnw2440.tar
- 配置linux下的DNW程序，本人亲测绝对好使！-Under the Linux configuration of the DNW program, my dear measured absolutely so!
i2c-dbg
- linux i2c 模拟驱动程序，应用程序-linxue i2c driver
cy7c68013-usb-gu-jian-dai-ma
- cypress公司的cy7c68013开发usb固件程序代码-the cypress cy7c68013 development usb firmware code
cvb
- 在S5PC100ARM板上关于LED、温度传感器、PWM、按键的驱动-About the LED ,temperature sensors, PWM, the key driveron the S5PC100ARM board.
ov5647_mipi_raw
- 基于android MTK平台通用0v5647摄像头驱动
camera
- 基于平台S3C6410， USB Camera应用程序，本人已经调试成功。-Based on the platform S3C6410, USB Camera application, I have been successful commissioning
Linux-source-code-
- linux源代码-fork[1]. c源代码，不多说，很好的资料-Linux source code-fork