资源列表
dsp2812_CAN
- 刚调通的2812CAN总线通讯，设置波特率为250kps，为标准CAN的发送模式-Just tune tung 2812CAN bus communication, set the baud rate of 250kps, a standard CAN-send mode
UARTCONTROLRELAY
- 通过串口接收到外部发来的命令,来控制8路继电器的开关-Received through the serial port to an external command sent to control the 8-way relay switch
1232237441534
- RCC底层通信程序 包含协议和测试报告-RCC SerialPort
MAX232CPE
- MAX232手册 MAX232手册 -MAX232手册MAX232手册MAX232手册
FULL_DUPLEX_UART
- 運用nec 原有uart 功能,做一個full duplex 的uart 資訊傳送.是nec 的範例程式。-Uart function of the original use of nec and do a full duplex transmission of uart information. Is nec sample program.
CRC16
- 对一组数进行计算，产生两个字节的CRC校验结果的程序-Calculated on a set number to generate two bytes of the CRC check result of the procedure
gprs
- GPRS AT 指令集封装程序，基于MC45-GPRS AT command set package program, based on the MC45
serialcommunication
- 自己编写的串口通信上位机。一直工程在用，其中的发送数据我已经做了修改！-the programme of serial communication
armjtagtrmrev02rev01
- Project how to make jtag rs232 programmator
Cutter
- 西门子PLC步进电机控制+TD200显示示例-Siemens step moter+ TD200 Demo
async_fifo
- 异步fifo 源程序代码 欢迎大家学习 用VHDL语言编写-asy fifo
pic_rs232
- a minimal microcontroller based project to establish a communication on the serial port