资源列表
qt_v4l2
- 采用v4l2 进行USB摄像头数据采集，并且，能够通过QT界面来进行图像数据的显示-Using v4l2USB camera data acquisition, and, through QT interface to the display image data,,,
EnumUSBDevices
- Enumerate USB controllers, hub, devices
HidUartExample
- 使用UART转USB芯片CP2110的应用示例，能获得UART发送到USB的数据-CP2110 USB chip UART transfer using the application example, can be sent to the USB UART data
Get-USB-ID
- 主要是用C++语言实现USB设备的获取,例如常见的设备号，PID,VID等-how to get USB in CPP
USBHID
- 这是一个演示使用VB对USB-HID设备进行数据读取写入的通讯示例-This is a demonstration using VB on the USB-HID device to read data written communication example
usb_control
- 这是VC 6.0下的USB上位机的一个例程,大家一起学习-This is the USB host under VC 6.0, a routine, we will study together
IC-WRITE-TI
- 通过USB接口给TI的芯片编程，写入条码数据，运用CRC原理-Through the USB interface to TI s chip programming, bar code data is written, the use of CRC principles
6.2
- 实用NI USB 6009数据采集卡 利用labview数据采集VI所实现的多通环数据采集VI的前面板和程序框图-Practical NI USB 6009 data acquisition card using labview data acquisition VI realized by many tong ring data acquisition vis front panel and program diagram
usbFPGAconnect
- 该例程是PC机通过FX2-CY7C68013-A的USB2.0控制芯片与FPGA实现通信。其中的工程和代码包括PC机上的USB固件程序、驱动程序、上位机程序，FPGA上的VERILOG通信程序。-The routine is a PC, through the FX2-CY7C68013-A of the USB2.0 controller chip and the FPGA to achieve communication. One of the projects and code, incl
USBI2C
- 通过USB接口访问IIC设备，包含固件程序、驱动程序、上位机程序-IIC device through the USB interface to access, including firmware, drivers, host computer program
USBMulti-ChannelAcquisition
- 基于USB数据采集卡的数据采集，并且是多通道数据的采集并时实的显示。-USB data acquisition card based on data collection, and is multi-channel data acquisition and real-time display.
SlaveFIFO
- 用vc++6.0实现与usb设备通信的功能，可收发数据。-Achieved with the vc++6.0 and the usb device communication function, can send and receive data.