资源列表
slave_pw
- power ctrl this a power contrl program. you can control you plug in device by com port or ir remote control.
cpld_bus
- CPLD的VerilogHDL总线代码,在EPM7128SLC84-10+Quartus4平台上运行通过.-CPLD bus Verilog HDL code, the PLD-10 Quartus4 platform to run through.
9850
- KeilC51编程,51与DDS芯片 AD9850的接口程序.包括对DDS的初始化以及输出控制.-KeilC51 programming, and 51 AD9850 interface program. DDS including initialization and output control.
51+E2PROM
- KeilC51开发,51单片机与E2PROM的接口程序,并且有串口与液晶的输出.-KeilC51 development, SCM and 51 E2PROM interface procedures, and a serial port with LCD output.
4x4_KeyBoard
- KeilC开发,51通过8255对外部4*4键盘进行控制.按键分别为0-9以及上下左右,加上确认取消.-KeilC development through 8255 to 51 4 * 4 external keyboard control. Keys were 0-9 and above and below, coupled with canceled.
C51精确延时
- 51单片机,精确延时小函数.提供500ms,200ms,10ms,1s的精确延时,直接调用即可.-51 microcontroller, small precision delay function. For 500ms, 200ms, 10ms, the precise 1s delay, can be called directly.
关于单片机软件狗的讨论
- 单片机看门狗的编程以及硬件实现,软件如何安放看门狗程序-watchdog microcontroller programming and hardware, software watchdog placed how procedures
实时时钟芯片DS1302的C51程序列子
- 实时时钟芯片ds1302的应用和c51程序,调试过的.-ds1302 real-time clock chip decoder and the application procedures, debug before.
51单片机与USB芯片PDIUSBD12接口固件程序
- 51单片机与USB芯片PDIUSBD12接口固件程序,来源于周立功单片机-51 MCU with USB interface chip PDIUSBD12 firmware procedures, Zhou, who comes from SCM
多种液晶显示驱动程序样例
- 含多种常用液晶驱动芯片和点阵驱动程序样例,有很好的参考价值,本人特意会集上传-used with a variety of LCD driver chips and sample matrix driver, a very good reference value, I will deliberately set upload
cypressusb2.0
- Cypress公司的USB芯片开发资料，提供USB芯片驱动程序，对开发USB的嵌入式应用有很大帮助-Cypress's USB chip development information, providing USB chip driver for the development of embedded applications USB be of great help
at91samiar
- at91 sam 系列arm7单片机程序下工具，通过串口编程，简单容易 -the series of at91 sam is the tool of arm7 singlechip programer,via serial program,simple and easy.