资源列表
51Hex_Bin_Tool
- 实现将hex文件转换为bin文件，该工具经过调试使用正常，第一个word的字节序可能需要调整-Implementation to convert hex file for the bin file, the tool use normal after debugging, the first byte order may need to adjust the word
ALIENTEK-MINISTM32-GPSNEO-6M-
- GPS模块的信息读取，解析。通过UART接口和单片机直接通信。能够知道经纬度、速度、高度、时间等信息。-Read the information of GPS module, parsing.Through the UART interface and the single chip microcomputer communication directly.To know the information such as latitude and longitude, speed, height
HMC5883L
- 罗盘模块HMC5883L驱动程序。通过I2C接口和单片机通信 ，可准确读出和北极的夹角。-A compass module HMC5883L driver.Through the I2C interface and the single chip microcomputer communication, can accurately read and Angle of the arctic.
BME280_driver-master
- 高度计BME280的驱动程序，能够较为准确的得出相对于海平面的高度。-Altimeter BME280 driver, and can be more accurate relative sea level height are obtained.
EVAL6470H
- ST公司关于电机驱动芯片EVAL6470H的驱动程序和相关资料。该芯片能够精确的驱动步进电机。-For motor driver chip EVAL6470H ST firm driver and related information.The chip can accurate driving a stepper motor.
LSM303DHL-STM32_CODE
- 3轴传感器LSM303DHL的驱动程序。能够输出航向角、俯仰角、横滚角信息。-Three axis sensor LSM303DHL driver.Can output the heading Angle, pitching Angle, roll Angle information.
10.2LCD_display-04
- 应用于车载系统娱乐设施，控制图像RGB数据在LCD屏上点屏，包括LCD的点屏时序控制，以及相关的LCD屏配置信息-Used in vehicle system entertainment facilities, control the RGB image data on the LCD screen, including point of LCD screen sequential control, and related LCD configuration information
perpetual-calendar
- 万年历源程序，51单片机，可动态修改寄存器值，-51SCM perpetual calendar
Sparten6-CODE-_Verilog
- 基于xilinx 厂商的FPGA硬件的开发源代码，包括UART,SPI,以太网通信-The development of FPGA hardware based on xilinx manufacturers source code, including the UART, SPI, Ethernet communication and so on
SPI-W25Q64
- 读写华邦的FLASH芯片程序，程序中所用型号为WINBANG W25Q64-Winbond FLASH chip program to read and write，The program used in the model for the W25Q64 WINBANG
SPI
- 单片机spi接口测试，实际测试通过，可以作为参考-mcu spi test
motor
- 单片机控制马达的程序，可正常控制马达，作为测试程序-mcu motor