资源列表
DWM1000
- DWM1000室内定位源码，UWB超带宽室内定位。(DWM1000 indoor location source code, UWB ultra bandwidth indoor location.)
pwm
- 本程序可以实现输出不同占空比（0-100）和不同频率的pwm波形；满足驱动不同硬件的需求；(This program can output PWM waveforms with different duty cycles (0-100) and different frequencies, and meet the needs of different hardware drivers.)
MPU6050+OLED
- STM32控制MPU6050输出三轴加速度计与三轴陀螺仪原始数据，并用OLED显示传感器的电压值。(STM32 controls MPU6050, outputs three axis accelerometer and three axis gyroscope raw data, and displays voltage value of sensor with OLED.)
NAND FLASH +STM32
- stm32控制实现与非型FLASH的存储。内部利用循环数组缓存，存储递增数。(The STM32 control implementation and the storage of the non - type FLASH. Internally, we use cyclic array buffer to store increasing number.)
ra8875驱动
- TFT控制器8875驱动，亲测有效。。。。(TFT controller 8875 drive, pro test effective...)
AD7173 +OLED
- STM32控制24位ADC实现模数转换功能，并利用OLED显示。(STM32 controls the 24 bit ADC to realize the analog-to-digital conversion function and displays it by OLED.)
AD7192Inclinometer
- 利用STM32控制24位adcAD7192实现模数转换，并转换为倾斜角，并带有自标定功能。(The 24 bit adcAD7192 is controlled by STM32 to realize analog-to-digital conversion, and converted to tilt angle, and has self calibration function.)
AD7173+FLASH CH0 5K
- 实现24位ADC转换功能，并存储于NAND型FLASH中。(The 24 bit ADC conversion function is implemented and stored in NAND FLASH.)
jar_files
- java sdk code for embedded systems
C5G_SRAM_RTL_Test
- 官网c5板子的SRAM工程，可以直接一直使用。(The SRAM project of official website C5 board can be used directly)
一个完整的dsp实验程序
- 一个完整的DSP试验程序，对初学者学习DSP有帮助(Complete DSP test program)
74H595
- 74H595的实验程序，经测试运行良好。74H595串行输入、并行输出的位移缓存器，在学单片机要用到(The experiment program of 74H595 is well tested. 74H595 serial input and parallel output displacement buffer. It's used in learning MCU.)