资源列表
src
- 程序实现触摸屏控制步进电机的转动，单击触摸屏，可使步进电机转或停。-Program for touch screen control the stepper motor rotation, click the touch screen, step motor can turn or stop
LPC2378_SD
- LPC2378 ZLG/SD读写模块V3.0, 支持SD卡和MMC卡；-LPC2378 ZLG/SD reader and V3.0, support for SD cards and MMC cards
pdc120(ucos)
- 这是一个在c8051f120单片机上实现了ucos-ii源码移植的程序。方便了用户，并为用户节约了时间，-This is a single chip in c8051f120 realized ucos-ii source of the procedure. Convenient for users, and users to reduce the time
STR912--UCOSS-II
- STR912 ucos-ii源代码 已经移植好了，希望对用STR912 ARM的朋友有帮助.-STR912 ucos-ii source code has been ported well, hope to use the STR912 ARM' s friends to help.
bootloader
- * Descr iption : This Program allows an AVR with bootloader capabilities to * Read/write its own Flash/EEprom. To enter Programming mode * an input pin is checked. If this pin is pulled low, programming mode * is entered. If not, normal executi
UCOS2.83UCTCP
- UCOS和UCTCP源代码---真正的商业代码 直接拿来可用-UCOS and UCTCP source code--- a real commercial code can be used directly to bring! ! ! ! !
xilinx_UCOS
- ucos2和xilinx microblaze process应用笔记-ucos2 and xilinx microblaze process application note
UCOSII
- stm32上的 ucos II 的实现，mcu 是 stm32f103vct6 -stm32 the ucos II implementation, mcu is stm32f103vct6
uCOS-II
- 用以三星arm芯片的ucos操作系统，包括了内存管理，flash定时器和库函数等-ucos for GT2440,including flash mmu lcd and timer
touch
- UCOS操作系统在ARM9TI上的移植，实现了操作系统的移植，进程的使用等-UCOS operating system in ARM9TI on transplantation，Realizing the OS transplantation, process use etc
uc_Probe_communications_protocol_2.2
- 实时操作系统uc/os2 的监控软件uc/probe通信协议，对开发嵌入式监控软件有极大的参考意义-Communication protocol of Real-time operating system uc/os2 s monitoring software uc/probe Great reference value for developing of the embedded monitoring software
NANDFLASH
- 基于ARM和uCOS-Ⅱ嵌入式平台的NANDFlash存储驱动系统设计-And ARM-based embedded platform uCOS-Ⅱ system NANDFlash storage drive