资源列表
software_wireless_design
- 软件无线电接收机设计源码和电路图。采用TI 的TMSC320C6713实现的-software radio receiver circuit design and source code. Using TI's TMSC320C6713 realized
ad976test
- dspAD976驱动测试子程序(2407),驱动A/D模块AD976芯片 -dspAD976 drive test subroutine (2407), driven A / D chip module AD976
lab17-iir
- 使用DSP2812实现无限冲击响应滤波器（IIR）算法，该程序用C语言编写，可在CCS2000下运行。-DSP2812 unlimited use of impact response filter (IIR) algorithm, the program used the C language, the CCS2000 running.
bch_euc
- bch 编码、解码程序，可以对任意长度的信息添加纠错码。-BCH encoding, decoding procedures can be arbitrary length of the right information to add error-correcting codes.
tms320f2812
- 关于DSP2812的CAN模块的源程序（非常适合初学2812的及用CAN总线的-on the DSP2812 CAN module of the source (very suitable for beginners 2812 and the CAN Bus
McBSP_EDMA
- 把Ti C6711 DSP上的McBSP配置成串口模式，通过EDMA通道以中断方式传给CPU作处理。-Ti put on the C6711 DSP McBSP Serial configured model, through EDMA access pass to interrupt the CPU for processing.
6713audio
- 这是基于TMS32OF6713 DSP 的音频处理开发已源代码。-TMS32OF6713 DSP-based audio processing of the source code has been developed.
DSP_SCI_TEST
- 一个C编写的简单的DSP 2407A 的SCI串口测试程序,用于测试SCI调通-a simple preparation of the SCI TMS320LF2407A DSP serial test procedure for testing SCI--
MotionDetect
- 编程环境为TI公司的CCS，使用的平台为合众达的vpmdm642 此程序的功能为用DSP进行运动检测,利用运动检测可以发现视频图像中的微小的变化.主要应用于数字化监控-programming environment for TI's CCS, the use of the platform for up to the UCO vpmdm642 procedure for the DSP function for motion detection, the use of motion
yuv_to_rgb
- dsp入门级程序，可作为培训内容，可使菜鸟们作为了解ccs开发环境的例子-dsp entry-level procedures, as the training content, and will alternate as understanding ccs development environment example
DSPmatlab
- Dsp中的Matlab ， AFD_BUTT.M AFD_CHB1.M AFD_CHB2.M-Dsp of Matlab, AFD_BUTT.M AFD_CHB1.M AFD_CHB2.M
ANC
- 用DSP实现主动噪声消除器（ANC）的算法-DSP Active Noise Cancellation (ANC) algorithm