资源列表
FFT-TMS320C54x-DSP
- FFT的TMS320C54x DSP实现（ccs3.3编译器）,fft.c为主要程序，在程序注释所提示处设断点，再用CCS的图形查看功能可看结果。-The FFT TMS320C54x DSP to achieve (ccs3.3 compiler,), fft.c for the main program at the breakpoint in the program comments prompted then CCS graphical view function to see the
NDK_TCP_UDP
- 采用NDK开发包的网络通信程序，在C6455上经过测试，速度可达50Mb/s。 void tcpclient()函数是经过测试的。-NDK development kit network communication program, tested on the C6455, speeds of up to 50Mb/s. void tcpclient () function is tested.
PFC2PHIL
- 双Boost PFC程序,很有参考价值的资料！-two boost PFC
pm-sensorless.rar
- 基于TI dsp28035滑膜观测的永磁同步电机无位置控制,Position control permanent magnet synchronous motor based the TI dsp28035 synovial observations
PM_Sensorless_CLA_F2803x_cai
- 基于TI 28035 芯片的永磁同步电机无位置传感电机驱动程序,其中电机驱动算法放到CLA协处理器中执行,适合于双电机控制.-TI 28035 chip-based permanent magnet synchronous motor position sensing motor driver, motor drive algorithm on the CLA coprocessor suitable for dual motor control.
rs
- RS编码解码原程序，很有用的哟，希望能给你带来帮助。-RS codec original program useful yo, I hope to give you help
TMS320F28335_CCSV4_ADCDMA
- TMS320F28335 通过DMA传输进行的ADC采样程序,CCSV4下的项目-TMS320F28335 ADC samping program through DMA，CCSV4 project
DTMF-detecter
- 这是一个DTMF的解码程序，用了两种方法：一是FFT，而是Goertzel算法 -This code is designed to detect the DTMF. Two methods to achieve it: one is FFT and the other is Goertzel algorithm.
SEEDDTK6713
- SEED DTK6713光盘自带源码，亲测可用。-Source of the SEED DTK6713 CD comes, pro-test available.
科远DCS项目程序
- 科远DCS项目程序，常规控制逻辑，设备保护逻辑，正常信号组态处理过程。
6678
- 用CCS5.2编写基于TMS320C6678的C程序。实现脉冲压缩，MTI以及MTD.-The written CCS5.2 TMS320C6678-based C program. Pulse compression, MTI and MTD.
DAC7724
- 该代码是TI公司的TMS320C6747与外设DA7724之间通信，已经进过测试，可以运行。-The code is TI s TMS320C6747 peripheral DA7724 communication, has been to test, you can run.