资源列表
μC_OS-II在Nios上的移植
- μC_OS-II在Nios上的移植（共同学习ucosII）-uC_OS-II port to Nios (Hope to learn ucosII together )
SST28F040读写源程序
- SST28F040读写源程序,C语言编写,方便移植-SST28F040 read-write source program, the C language compilation, facilitates transplants
基于ARM 的PDA拼音输入法源程序
- 基于ARM 的PDA拼音输入法源程序,c语言编写,方便移植-A phoneticize input method for PDA. Based on ARM, coded in C. It is facility for porting.
at91samiar
- at91 sam 系列arm7单片机程序下工具，通过串口编程，简单容易 -the series of at91 sam is the tool of arm7 singlechip programer,via serial program,simple and easy.
AT91SAM7S64-GettingStarted-IAR4_11A-1_0
- at91sam64编程实例，是一个初学arm7得很好的例子。-at91sam64 programming examples, beginner ARM7 is a very good example.
Easyboot with kernel
- 一个用asm写的操作系统原型 很适合大家学习学习-This a prototype of an operating system written in assembly language. It is very suitable for learning.
c语言中写二进制数
- c语言中写二进制数。引用例子： #define Bin(n) LongToBin(0x##n##l) void main(void) { unsigned char c c = Bin(10101001) // c = 0xA9 } -Write binary number in C language. Cited code: #define Bin(n) LongToBin(0x##n##l) void main(void) {
2051A-D
- 此程序是利用2051单片机P1.0,P1.1精密比较器功能实现a/d转换通过P1.0电位器调节，控制七只电磁铁动作间隔-This program implement A/D conversion by using precise comparision function of P1.0 and P1.1 of MCU 2051. P1.0 is used to adjust potential meter to control the time intervals of seven magnet
GS翻译
- 《KEIL C51 Vision2 中文入门教程》翻译-Translation of \"Tutorial of KEIL C51 Version2 in Chinese\"
nRF24E1发射接受程序实例
- 基于单片机、nrf24e1发射接受程序，有三个小程序，同时可进行PWM调试。-Three small programs for microcontroller to drive nRF24E1 to transmit and receive. It support PWM debugging.
I2C_PANEL
- 一个用于控制LCD panel显示的驱动程序。控制LCD读写和显示控制。-an LCD panel used to control the display driver. Reading, writing and control LCD Display Control.
minigui-res-1.3.0.tar
- minigui-res-1.3.0.tar.gz. 想学miniGUI，看这个代码就够了！-MiniGUI-res-1.3.0.tar.gz. MiniGUI, like, look at the code enough!