资源列表
CC2430-5
- CC2430 基础实验五 T2 的使用 用定时器 2 来改变小灯的状态，T2 每发生一次中断小灯改变状态一次。-CC2430 experimental basis for the use of five T2 timer with 2 to change the status of a small lamp, T2 interrupt for each occurrence of a change in the status of a small lamp.
CC2430-6
- CC2430 基础实验六 T3 的使用 用定时器 3 来改变小灯的状态，T3 每发生200 次中断小灯改变状态一次。-CC2430 experimental basis for the use of six with T3 timer 3 to change the status of small lights, T3 occurred every 200 to change the state of interrupted a small lamp.
ad
- 基于STC单片机的AD转换程序，本人实验过，可以正常使用-STC microcontroller-based AD conversion process, I experiment too, you can use
VIIC_C51
- 此程序是I2C操作平台（主方式的软件平台）的底层的C子程序,如发送数据 及接收数据,应答位发送,并提供了几个直接面对器件的操作函数，它很方便的 与用户程序连接并扩展.-MN
C8051F020
- C8051F020窜口直接使用用的是printf系列的语句，精简提炼，直接编入程序直接使用即可作为串口输出-C8051F020
slac163b
- msp430f21x2开发例程，其中包含430f21x2的外围功能模块基本应用的寄存器设置。-msp430f21x2 the development of routines, including the external function modules 430f21x2 basic set of registers.
8279_52
- 52系列单片机+8279成功实现按键显示的程序-52 Series MCU+8279 show the successful implementation of key procedures
demoXEP1820
- FREESCALE XEP100 源代码，是自己写了好久写的很好。-FREESCALE XEP100 CODE
superled
- 超级流水灯程序，里面包含整理收集的所有的超级流水灯程序，包括渐亮渐暗，变速运行等-18b20
DS1302-LCD
- DS1302-lcd驱动源码，很全很实用的，希望能够对你有所帮助！-DS1302-lcd-driven source code, it is full of very practical, I hope you can help!
REG89LPx052
- Include file for ATMEL AT89LPx052 MCS-51 base instruction on enhanced CPU core that can fetch a single byte from memory every clock cycle, So may faster than classic 8051 architecture 6 to 12 times. These .h define SFR that not available in any
megaPyModulePack_unsigned_v.1.5
- cong hoa xa hoi chu nghia viet nam