资源列表
rtthread-0.3.0
- rt-thread source code rt-thread source code
SystemTick-application-for-LED
- The use of SystemTick delay control LED blinking (single channel GPIO), different time flashes, often bright etc.
lpcopen_2_10_lpcxpresso_nxp_lpcxpresso_1769
- LPC EXPRESSO TIMER CHECK
MP3_PLAYER
- STM32开发MP3的工程代码,包含TFT界面,音频编码,音频文件解码-STM32 development project MP3 code contains TFT interface, audio coding, audio file decoding
uartverilog111
- 实现FPGA与Pc无线蓝牙交互，可移植，编译通过-Implement FPGA and Pc Bluetooth interactive, portable, compiled by
eth_test_xps
- 基于xilinx SOC的SDK工程和最小系统ip核，可用于以太网测试，使用LWIP协议栈-The SDK works on xilinx SOC and minimum system ip nuclear, can be used for Ethernet testing, use LWIP Stack
DE2_SD_Card_Audio
- 本程序由verilog语言写成，主要实现的功能是对于sdcard中的音频文件的读取及播放-This program is written in Verilog language, the main function is to read and play sdcard audio file
ISE
- 关于ISE软件的使用说明，介绍非常齐全，且包含各种实例-About ISE software instructions, introduced a very complete, and includes a variety of examples
jduchuanganqi
- 为角度传感器CAN通信程序代码，代码是在keil环境条件下编译的，使用的是stm32库函数-As the Angle sensor CAN communication program code, the code is compiled in the keil environment conditions, using the stm32 library functions
Button-EXTI_Interrupt
- STM32F103RBT6单片机的按键中断，通过配置中断控制单元实现外部中断信号输入后的相应操作-STM32F103RBT6 SCM key interrupt, the interrupt control unit realized by configuring the appropriate action after external interrupt signal input
DS18B20数字温度传感器实验
- 实验器材: 探索者STM32F4开发板 实验目的: 学习DS18B20数字温度传感器的使用. 硬件资源: 1,DS0(连接在PF9) 2,串口1(波特率:115200,PA9/PA10连接在板载USB转串口芯片CH340上面) 3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过FSMC驱动,FSMC_NE4接LCD片选/A6接RS) 4,DS18B20传感器一个(接在PG9上). 实验现象: 本实验开机的时候先检测是否有
A4_Mod_Top
- 多终端点歌系统实验，我们可以使用串口外设发送0~9这10个数字控制蜂鸣器发出不同的音调，可以使用PS/2外设发送0~9这10个数字控制蜂鸣器发出不同的音调，还可以使用红外外设发送0~9这10个数字控制蜂鸣器发出不同的音调。(Multi terminal point song system experiment, we can use the serial port peripherals to send 0~9 10 numbers to control the buzzer to send d