资源列表
MPU6050 I2C读取数据 -精简版
- stm32通过iic读取mpu6050数据(stm32 read mpu6050 by iic)
基于单片机的室内空气净化系统
- 基于单片机的室内空气净化系统 附录原理图(Schematic diagram of indoor air purification system based on single chip microcomputer)
stm32f10x工程模板
- stm32f103的工程模板，用的是原子建立工程的方式(STM32F103's engineering template, using the way atom builds engineering)
无线传输语音
- 实现无线传输语音的功能，本代码通过使用STM32F103芯片，通过RF2401模块将语音通过无线方式发送出去，语音的获取是通过VS1053模块，进行ADPCM的语音数据编解码，获取到语音数据。(To achieve the function of wireless transmission of voice, this code uses STM32F103 chip to transmit voice through wireless way through RF2401 chip. The
bizhang
- 由STM32F4系列单片机作为主控芯片，再加上超声波模块进行测距，实现智能小车避障功能。(STM32F4 series MCU is used as the main control chip, and the ultrasonic module is used to measure the distance, so as to realize the obstacle avoidance function of the intelligent car.)
DM6437-BOOT-SOFT
- DM6437开发平台软件,支持各种启动方式,满足DSP开发-DM6437 software development platform, to support a variety of start-up mode, to meet the DSP development
nios2PtfcardPvga
- 使用nios的io管脚模拟spi时序对tf卡进行数据读写，同时附带一个简单的用verilog写的在vga显示器上刷屏的代码-Use the io pin of nios to simulate the timing of spi to read&write date from&to tf card, and comes with a simple code written by verilog to refresh the vga monitor.
TASM5andborland4.5
- 包含了用borland c++ 4.5调试用的TASM软件与UCOS_II可用源码，并且有移植UCOS_II到X86 PC上之图文版的具体方法-Included with borland c++ 4.5 debug TASM used UCOS_II available software and source, and transplant to UCOS_II graphic on a X86 PC version of the specific methods
bc4.5
- 这个上面详细讲解了ucos2即邵贝贝书中的开发平台的搭建，我找到的最好的资料-The above gave a detailed ucos2 that Shao Beibei Development Platform for the book, I found the best information
MUSIC1--finish
- 音乐计算器，当输出分别为正负数时，用蜂鸣器响起两段不同的音乐。计算器可实现0~999范围内的加减与或比较功能，并支持连续运算。-Music calculator
34gejiaocheng
- 34个单片机的设计资料，内有仿真图跟程序-34 single-chip design data, there are simulation plan with the procedures
1.44彩屏
- 1.44寸TFT彩屏程序，单片机是stm32f103，编译器是MDK5(1.44 inch TFT color screen program)