资源列表
linux
- 东软linux开发编程课件.rar 本平台是由东软集团有限公司中间件技术分公司针对中国嵌入式系统开发领域设计开发的基于嵌入式Linux的系统开发平台。-Neusoft programming linux courseware development. Rar
tm4c123_mpu6050_test
- TIVA模块移植mpu6050程序测试成功，通过模拟I2C进行连接-TIVA mpu6050 module transplantation program was successful, by simulating I2C connection
CH376
- STM32F103VCT6控制CH376进行U盘读写，并创建TXT文件-STM32F103VCT6 control CH376 for U disk read and write, and create a TXT file
01，柯南大侠-ucGUI人机界面
- stm32f103做的gui界面，alientekb开发板(The GUI interface made by STM32F103)
lcd12864_2
- 在Quartus II环境中编写的LCD12864中文显示程序-In the Quartus II environment written LCD12864 Chinese display program
LIP1711CORE_system_gpio
- LIP1711 GPIO System Core Verilog source code
branding
- igo_8 debrend on win_ce 5.0
STM32程序LCD5110+DDS9110）
- 本文件包含有LCD5110显示界面程序，以及结合DDS9910的实用程序。(This document contains the LCD5110 display interface program, as well as the combination of DDS9910 utility.)
encoder-c51-program
- IAR 编译器下 51单片机 读取4000线 光学编码器程序-IAR compiler under the 4000 single chip to read 51 wire optical encoder program
4.3inch-480x272-Touch-LCD-B
- HX8257 LCD driver on LPC Cortex-M3
3.5STM32UART
- STM32串口源码，基于最新固件库3.5，亲测可用-STM32 serial experimental source
xuanzhuandaolibai
- 旋转倒立摆的驱动程序，包括步进电机、编码器驱动。编码器是600线一圈，经测试可以准确测量0到180和0到-180的角度。-Rotary inverted pendulum drivers, including stepper motor, encoder drive. The encoder is around 600 lines, the test can accurately measure the angle 0 to 180 and 0 to-180.