资源列表
UCOSIII_DEMO
- stm32f4 ucos ，包含了按键扫描和防抖的处理，按键可以实现长按短按，短按弹起，长按弹起-stm32f4 ucos, it contains a key-scan and image stabilization process, the key can achieve long press short press, short press bounce, bounce press
sd_card
- 基于FPGA的SD控制器,ALTERA的3C25开发板上可跑-SD controller base on FPGA，implement in altera NEEK board.
stm32-radio-master
- 基于STM32的RTT实时操作系统，网络收音机源码。-RTT STM32-based real-time operating systems, network radio source.
Windows_CE_ALLSource
- 《Windows CE嵌入式高级编程及其实例详解》的全部源代码，对嵌入编程有很大帮助。-" Windows CE for embedded and high-level programming examples explain" all the source code for embedded programming are very helpful.
waveform-storage-playback-system
- 基于STM32的波形存储回放系统、可实现波形的存储和回放-Based the STM32 waveform storage playback system, storage and playback of the waveform can be realized
MIPI_VIDEO-MODE-TEST-PROGRAM
- 此例程是基于ARM9+SSD2825构架的高清LCD测试程序，可用于测试MIPI_VIDEO和MIPI_command 模式下的WVGA,FWVGA,QHD等高清手机LCM。支持4通道MIPI接口，SSD2825是 晶门科技的高速4通道MIPI传输器。-This routine is the HD LCD based on ARM9+SSD2825 architecture test program can be used for high-definition WVGA, FWVGA, QHD
c-language
- c 语 言 使 用 编 写 教 科 简 介-About UNESCO with the preparation of c language
DS1302
- 一些基于STM32这个平台上的例程，帮助我们更好的学习它的使用！-Some based on STM32 routines, on this platform to help us better learning the use of it!
apm2.5
- apm2.5开源飞控代码，可用于多轴飞行器及固定翼-apm2.5 flight control source code, can be used for multi-axis and fixed-wing aircraft
uCOS_DEMO(V3_9325new)-9.3
- 一个写的不错的STM32 uCOS例程！-A written STM32 uCOS routine!
sg1
- 使用 STM32F103 的自带的 D/A 口 做的信号产生器，开发环境为 IAR for ARM 6.-use STM32F103 D/A port signal generator，IAR for ARM 6.22
hz
- 1、液晶显示模块提取点阵汉字软件 2、多种取模方向：先左至右，再上后下；先上后下，再左后右 纵向 3、支持多种语言， 4、支持多种字体