资源列表
EP1C3
- 这是一个用Verilog语言编写的一组程序，主要是熟悉开发板的应用，以及verilog语言-This is a Verilog language with a set of procedures, mainly familiar with the application development board, and the verilog language
auto
- automobile garage management system
stm32-I2C-driver
- 这个是我们四轴飞行器课设时候留下的各种驱动程序和资料，stm32模拟I2C驱动L3G4200,ADXL345,HMC5883,BMP085成功,含大量中文资料-This is our four axis flight vehicle class set time to leave a variety of drivers and data, STM32 simulation I2C driver L3G4200, ADXL345, HMC5883, BMP085 success, with a
u-boot
- u-boot2009.2版本，已经移植到友善之臂SBC2410D的开发板上，修改好其中tftp命令timeout的时间太短而导致的文件下载不成功的缺陷。-u-boot2009.2 version, has been transplanted to the arm-friendly development SBC2410D board, amend the tftp command timeout which is too short of time caused by defects in th
旋转LED制作
- 旋转LED制作，有详细资料，自行查看，内含原理图，程序，制作清单，教程等等所以一应俱全的信息，完全可以参考仿制(this is a good project)
files-of-avr
- 这个文件让大家学习单片机的各种学习资料，非常适合初学者学习，为大家提供各种单片机的不同特点，方便大家学习单片机的种类和方法，很全面的-This file allows you to learn a variety of learning materials SCM is very suitable for beginners to learn, provide a variety of different characteristics of the microcontroller, facil
4412Schematic-PCB
- 4412 开发板的资料，很少有.里面有主板的原理图，底板的原理图-4412 开发板的资料，很少有
4CE6_IIC_CARD
- 关于II card转换的NIOS源码程序，已调试，建议在EL-ARM-DSP-IV实验箱上调试。-NIOS source program for II card，debugging on EL-ARM-DSP-IV experiment box.
verilog_dds
- verilog实现dds，用于FPGA产生正弦波，适用于Cyclone 2系列-verilog achieve dds, FPGA is used to generate the sine wave, in the Cyclone Series
Pmod-CAM-5M
- zedboard平台，OV5640自动对焦模组图像采集和显示，IIC寄存器通过软件配置-zedboard platform, OV5640 autofocus image acquisition and display module, IIC registers configured through software
KNX---principles-of-the-technology
- KNX/EIB通信网络是一种倾向于网络管理的应用型网络。每个总线连接单元(Bus Coupling Unit, BCU)在链路层之上具有相同的通信内核。KNX/EIB通信协议包含7层OSI标准的通信模型。-KNX/EIB communication network is a way to tend to the network management application network. Each bus connection units (Bus Coupling Unit, BCU) in
DE2_NIOSII_uCOSII_2012
- 一个简单的UCOSII操作系统，在DE2上面调试通过-A simple UCOSII operating systems, debugging through the DE2 above