资源列表
MiniGUI-STR_uCOS
- minigui在ucos操作系统的移植例子。是学习 minigui的好资料-minigui ucos operating system in the transplant example. Good information to learn minigui
DSP28335-3
- DSP 28335的例程，开发板例程，代码写得很好-DSP 28335 routines, development board routines, the code is well written
KBCode
- 实现对键盘的按键测试,支持不同国家语言键盘-Keys on the keyboard test, and support different national language keyboard
SoEZ-USB
- SoEZ-USB开发板配套光盘，CY7C68013A实验板的配套光盘，包括原理图，实验程序源代码,开发板使用说明等。-SoEZ-USB development board supporting CD, CY7C68013A development board supporting CD-ROM includes schematics, test program source code, development board using the descr iptions.
qt
- 24小时学通Qt 有关qt的详细教程，详细，24小时学会
CIII_EP3C40F780C8_24_16LED_Array
- SOPC,CycloneIII系列芯片EP3C40F780C8，NIOS II IDE,16LED_Array实验代码-SOPC,CycloneIII，EP3C40F780C8，NIOS II IDE, 16LED_Array code
fat32
- FAT32 FAT16 SD /micro_fat_filesystem fat32文件标准 U盘相关资料 ZLG_IP, TINY_FATFS 例子-FAT32 FAT16 SD/micro_fat_filesystem fat32 file standard U disk information ZLG_IP, TINY_FATFS example
数字信号处理
- 数字信号处理教程（程佩青，第三版-完整版）(Digital signal processing course (Cheng Peiqing, Third Edition))
USB_save
- 这是基于FPGA的USB通讯程序。通过在quartus中建立SOPC，建立PIO口，并在NIOS中写驱动和寄存器等，实现USB通信。经检验，该程序通信正常。-This is FPGA-based USB communication program. By establishing the quartus in SOPC, establish PIO mouth and NIOS to write drivers and registers, realize USB communications.
grlib-gpl-1.1.0-b4108
- gaisler公司在2011年发布的的leon3的源代码！-source code of leon3
STM32F429_VCP
- STM32F429，在keil环境下编译，可以使USB作为串口使用，收发数据。(USB is used as a serial port, and it can receive and receive data normally.)
Reconfigurablefliter
- 自己编写的SystemC源代码，拥有五级流水线的可重构图像滤波器，支持两种图像滤波算法，中值滤波和邻域平均滤波，支持算法配置-I have written SystemC source code, the reconfigurable image filter has a five-stage pipeline, supports two types of image filtering algorithms, median filtering and neighborhood average