资源列表
proteus仿真实例
- 详尽好用的Proteus51仿真实例，帮助快速入门(Detailed and easy to use Proteus51 simulation examples, to help quick entry)
9b92 board timer test code
- IAR compiler stellaris_9B92 board timer test code
protelDesignDocument
- 8路温度巡回检测系统设计 温度检测范围0~100℃，分辨率0.5℃，环境共模噪声为5V。 各路可设置温度的上限值和下限值，在超出范围时发出报警信号。 每秒钟至少检测一次。 显示器轮流显示实时检测结果。-8 Temperature Cycle Detection System Temperature Measuring range 0 ~ 100 ℃, resolution of 0.5 ℃, environment, common mode noise 5V. Separ
forlinux-CAN-src
- s3c6410 飞凌CAN（mcp251x）转接板的驱动 连接图-s3c6410 forlinux CAN driver SCH
irrigation-v4
- 农林灌溉相关的驱动代码，包括(Agriculture and forestry irrigation related driver code)
fft_prj_final
- 基于FPGA的利用傅里叶变换将音频信号转化为图形通过VGA接口输出到显示器上。-FPGA-based Fourier transform of the audio signal into a graphical output via VGA connector to the monitor.
BF518-EZKIT-PCB
- ADIblackfin518的开发板的完整的电路图，对使用518的人有一定帮助-ADIblackfin518 complete circuit diagram of the development board, the use of 518 people who have some help
POS-H808
- 基于STM32F103VET6的ucos2.9+ucgui3.9+RTC+LED+TFT+TOUCH MDK源码，已稳定运行N久。-The MDK source code of ucos2.9+ucgui3.9+RTC+TFT+TOUCH based on STM32F103VET6
NonOS
- dsp 28377D 的一些demo例子，包含的代码比较多，主要是28377D的一些驱动，包括双核dsp 的定时器启用，can接口，核间中断，sram共享，内容比较多。这个是28377D多核例子。dsp跑裸机-Dsp 28377D some demo examples, including more of the code, mainly 28377D some of the drivers, including dual-core dsp timer enabled, can interfac
01.-VPM642_DSP_SDK
- SEED-VPM642的底层开发代码，非常详细，能够实现对底层硬件的驱动，适合学习使用！-SEED-VPM642 underlying the development code, very detailed, can be achieved on the underlying hardware drivers, for learning to use!
chaosbyuying
- 本设计主控制上有个阈值标签：+、-。超声波报警初始值为20cm，您可以通过这两个按键 设置阈值。 语音部分：您可以自己录音，按着录音键不放，您开始说话，当说话结束后松开按键，录 音结束。 液晶屏上显示A,B,C三个区域超声波测得的距离，右下角有个字母，显示那个字母就表示 哪个区域超声波测得的具体小于阈值，并播放该区域的语音。 -This design has a threshold label on the master control:+,-. Ultrasonic a
linphone-3.10.2.tar
- 嵌入式平台下linphone的移植，实现语音通话(Embedded platform linphone transplantation, the realization of voice calls)