资源列表
无符号数除法子程序16×16
- PIC单片机无符号数运算子程序,可以直接调用!-PIC unsigned few Operational subroutine can directly call!
NIAO
- 4位密码检测程序 可以修改所设定的密码 适合在C51单片机上使用-four password detection procedures can modify the password set by the C51 microcontroller suitable for use
print
- 热敏打印机驱动程序 用keil C 7.06开发，不可多得的例程
字符显示
- 单片机驱动液晶,基于51-Microprocessor LCD, based on 51
1602-0-9
- 1602液晶全屏循环显示0-9 针对AT89S51系列单片机-1602 full-screen liquid crystal display cycle 0-9 against AT89S51 Series Singlechip
ISR_IO
- ATXMEGA128A1单片机的IO口外部中断的应用-IO I ATXMEGA128A1 SCM application of external interrupt
s3c2410-485
- 基于ARM,S3C2410的串口检验程序，可实现两台计算机之间的485总线数据收发。-Based on the ARM, S3C2410 serial testing procedures, can be achieved between the two computers to send and receive data bus 485.
Text1
- 用于控制步进电机的一个很好的程序，可设置运行速度，圈数等-Used to control the stepper motor a good program, you can set speed, number of laps, etc.
gps
- AVR Mega16读取GPS模块并分析出海拔、时间、经纬度程序。-AVR Mega16 GPS module to read and analyze the altitude, time, latitude and longitude procedures.
timer
- 这是用C语言编的用于控制单片机的，请看一下，总之非常好！-good
BMP180
- stm32读取气压计BMP180的库文件，内容非常完备，之应用于四轴飞行器-STM32 read the gas meter BMP180 library files, the content is very complete, applied to the four axis aircraft
main
- MSP43X 系列单片机RS485双向通信，数据包长度为10-RS485 COMMUNICATION FOR MSP43X，be tested ok,THE NUIMBER OF DATA IS 10