资源列表
PID_algorithm
- PID算法的C语言实现，可以移植到单片机上使用-PID algorithm of the C language implementation, can be transferred to the MCU using
ds1302
- dallas ds1302时钟电路avr读写头文件源程序-dallas ds1302 clock circuit avr header file source to read and write
a2dp_sd_security
- 蓝牙远程控制协议的运用，续传，希望对大家有用！-agreement on the use of Continuingly hope useful for all!
interleaver_Matlab_Verilog
- Matlb和verilog编的两个文件。是关于OFDM通信中的交织。-Matlb and verilog OFDM communication interleave
chuankou
- 串口，电脑可接受，可发送；fpga实验主板通过串口线同样可接收发送-Serial port, the computer is acceptable, can be sent fpga board experiments also can be received via the serial line to send
test_i2c_1
- Testbench for an i2c controlling an I2c slave device
T2368iADC
- T2368i ADC功能 uc/os系统-T2368i ADC function
uart0
- 单片机串口学习理解和工程应用的好程序，注释全面，调试通过-Microcontroller serial learn to understand and engineering application of the program, comprehensive notes, debugging through
c8051f040-IIC
- c8051f040程序iic程序例程 ，测试可用，自己可以修改下用-c8051f040 English
DSP2833x_Adc
- 这个是DSP28335里的ADC程序，可以简单看看源代码，头文件等等！-This is the DSP28335 in the ADC program, you can simply look at the source code, header files, and more!
LM83
- 本程序用于通过SMBus总线接口对LM83温度传感器的工作模式设定，中断处理程序用于对温度超限的处理。 只开启远程温度D1+的监控，高温标志80摄氏度，严重越限温度为100摄氏度 51单片机P1.0和P1.1用于软件模拟Smbus总线时序 Smbus总线命令、数据读写程序，保持时钟线常态为低，数据线常态为高-This procedure is used by the SMBus interface mode LM83 temperature sensor setting, the i
main1
- LPC1752 GPIO中断测试例程，P2.10即KEY1键下降沿产生中断，测试时将JP4的BEEP与P0.7短接， JP4的KEY1与P2.10短接，每按下按键，蜂鸣器取反 注意：外部中断3与GPIO的P0与P2端口共用一个中断通道-LPC1752 GPIO_KeyInterrupt