资源列表
24c02
- ２４Ｃ０２ＥＥＰＲＯＭ存储，掉电存储可反复擦写
fbtest
- linux下操作framebuffer的例子，包括得到当前图形设备的高度，宽度，色深等。
C语言写的铁电存储器[FM25C160]的驱动程序
- C语言写的铁电存储器[FM25C160]的驱动程序，已测试通过。引脚定义见内,C language written in Ferroelectric Random Access Memory [FM25C160] driver have been tested. Pin as defined within the
Nokia5110.rar
- MSP430F149驱动Nokia5110LCD液晶,MSP430F149 LCD driver Nokia5110LCD
ax-12.rar
- AX-12数字舵机控制,利用C8051F310采用baud rate为1M的的UART信号，发送指令串来控制其转动。, control for AX-12 base on the C8051F330
fft
- FFT,单片机求FFT程序，该程序可以求的2的n次方数据的FFT-FFT, single-chip FFT seeking process, which can be 2 for the n-th power of the FFT data
ds1307
- ds1307,picc 时钟芯片的读写程序，短小，实用-ds1307, picc clock chip to read and write procedures, short, practical
1602-4
- 1602 四线制驱动 c51用 包含自定义字符-1602 four-wire system drive that contains a custom character with c51
1602
- 用 Freescale S12 系列单片机点1602的程序-Freescale S12 MCU family with 1602 points, the procedure
Electro-Clock
- 基于51单片机的电子钟设计程序，利用单片机的中断原理，四个独立键盘调整，数码管显示。-51 MCU clock based on the design process, using microcontroller interrupt principle, four independent keyboard adjustment, digital display.
ADC0832
- 一款高精度、高吞吐量模拟前端，可实现真16位峰－峰值分辨率，及500 µ s总转换时间（2 kHz通道切换），非常适合高分辨率多路复用应用。
F2808_TIMER
- 利用DSP,F2808的定时器功能，将GPIO19管脚每隔一秒开关一次，将GPIO19连接的二极管点亮熄灭一次-Timer function, using DSP, F2808 will GPIO19 pin once every two seconds to switch, connect the GPIO19 diode light goes out