资源列表
ultrasonicmeasurediatance
- 超声波测距器，可以应用于汽车倒车、建筑施工工地以及一些工业现场的位置监控，也可用于如液位、井深、管道长度的测量等场合。要求测量范围在0.10-5.00m，测量精度1cm，测量时与被测物体无直接接触，能够清晰稳定地显示测量结果。由于超声波指向性强，能量消耗缓慢，在介质中传播的距离较远，因而超声波经常用于距离的测量，如测距仪和物位测量仪等都可以通过超声波来实现。利用超声波检测往往比较迅速、方便、计算简单、易于做到实时控制，并且在测量精度方面能达到工业实用的要求，因此在移动机器人的研制上也得到了广泛的
lcd
- 基于51单片机的零件计数器，独立开关模拟零件通过，1602显示零件数量，可通过串口与计算机通信，上传当前零件数量。-Based on 51 single-chip parts counter, through an independent switch analog parts, 1602 shows the number of parts, communication with the computer via the serial port Letter, upload the curren
2
- 基于51单片机I2C总线及E2PROM断电后读取数据-Based on 51 single-chip I2C bus and read data after the power failure E2PROM
TCS
- 温度控制系统。通过单片机的控制系统的加温，恒温工作，可上位机进行通信。-Temperature Control System.Through the single-chip temperature control system, constant temperature and can communicate with PC.
stepmotor
- 步进电机程序，基于AT89C51 的步进 电机控制！-Stepper motor program, based on AT89C51 stepper motor control!
uartdemo
- 本段程序的功能是将它接收到的信息传递并且在LED阵列中显示出来。-This section features the program is to disseminate the message it receives and displayed in the LED array.
MT8888
- MT8888电话拨号芯片读写程序，拨号程序！-MT8888
SCCBdriver
- ov6620摄像头SCCB总线接口驱动程序，包含.h和.c文件。此程序在codewarrior下编译通过。在飞思卡尔MC9S12XS128平台上完成对ov6620的寄存器读写操作。系统时钟频率48Hz-ov6620 camera driver SCCB bus interface, including. h and. c files. This program codewarrior compile. Freescale MC9S12XS128 platform in the completio
Dream
- 这是我自己曾经比赛用过的一个简单的智能小车程序，光电检测的-This is my own race have used smart car a simple process, photoelectric detection
Word_Type
- 刚开始学习DFB时，见过的一个很简单的字体现实例子，值得一看-When I started learning DFB, seen a very simple font reality example, worth seeing
MSP430FR57xx_uscia0_spi_10
- Descr iption: SPI slave talks to SPI master using 3-wire mode. Data received from master is echoed back. ACLK = 32.768kHz, MCLK = SMCLK = DCO ~ 1MHz Note: Ensure slave is powered up before master to prevent delays due to slave init.-Descr i
scannig-light
- This example gives a functional emulation of a scanning LED array. Here a row of LEDs will light in turn one after the other. The circuit uses the PA port PA0~PA7, each bit of which is connected via a 240Ω series resistor to an LED.-This example