资源列表
UART_Rcvr
- uart 的源程序，用verilog编写-uart
mux4x1
- mux 4x1 with 2 control inputs, written in VHDL using 3 mathods: Logic gates, if, case. the fastest model is the one implemented with the case code.
vhdl
- 用VHDL语言实现的二进制到BCD码和格雷码的转换，程序通读性比较好。-VHDL language with the binary code and Gray code to BCD conversion, the program read through is better.
wendu
- 18B20的复位时序及子程序: init_1820: clr dq1820 mov r7,#40 acall Delay15us ；（1）复位：低电平至少480 us，用15*40=600us可靠 setb dq1820 ；（2）释放，为了在15-60 us后接收存在脉冲 mov r7,#1 acall Delay15us 20us mov r2,#90 ；（3） 最多等待（1+2）*90=270us wait:
msp430x471x7_clks_02
- clock oscillator prgm in MSP 430
EV1527_software_decoder
- 基于51单片机的对于RF编码器EV1527实现的软件解码程序.-Based on 51 single-chip encoder for RF EV1527 software decoder implementation.
yaoyaobang
- 本程序是一个要摇摇棒的程序，在空中摇动摇摇棒，能在在空中显示内容，-failed to translate
yuv
- 图像平移实验程序，dsp开发平台，可供编程人员进行参考。-Image panning experimental procedure, dsp development platform for programming reference.
DS1302_avr
- avr单片机驱动的ds1302时钟芯片的程序，自己调试已经通过了-avr microcontroller ds1302 clock chip driver program has passed its own debugging
dac0832
- 能够产生锯齿波，且递变是连续的，在示波器上可以清楚地看到波形。-Capable of producing sawtooth, and graded is continuous, you can clearly see the waveform on the oscilloscope.
led
- 数码管动态显示，由译码器片选实现，C程序-Digital tube dynamic display, achieved by the decoder chip select, C program