资源列表
TW9910_Application_Note
- TW9910应用说明，包括PAL、NTSC、CVBS视频信号寄存器控制数据。-TW9910 Application Note with PAL NTSC CVBS register data.
RA8806
- RA8806的寄存器写入子程序，已经测试过。-RA8806 register write routines have been tested.
PWM
- TMS320F28338的PWM程序 可以生成多路ePWM程序-TMS320F28338 the PWM process can generate multiple ePWM program
spi
- 三线spi接口，用verilog实现，作为一个模块，可以接收并行数据，然后串行发送-Three Line spi interface, using Verilog implementation, as a module, can receive parallel data, and then send the serial
3LED_51
- 一个简单的51 LED定时器程序，适合初学c51的同僚-A simple 51 LED timer procedures, suitable for novice colleagues C51
4key_led
- 此程序是基于单片机的，此程序为用四个键来控制彩灯程序-This procedure is based on the SCM, this process for four key procedures to control lantern
24c16
- ATMEGA单片机对24c016的读写程序，可直接使用-ATmega micro 24c016 literacy program can be used directly
AT45DB041B
- C8051F005硬件SPI驱动的AT45DB041B的读写驱动-hardware SPI driver AT45DB041B of C8051F005
1s
- 51单片机的入门程序，通过中断口读取按键状态实现按一次按键灯亮，再按一次灯灭的功能，看似简单，其实想做好也不容易。-51 Introduction to SCM process, I read through the interruption of the status of the achievement of key lights by a button, and then eliminate the function of a lamp, which seems to be simple,
AT450XX
- 45db041读写程序 MCU:LPC932 编译环境KEIL-45db041 interface
DM12232F
- 基于C8051的DM12232F液晶屏驱动程序-DM12232F of C8051-based LCD driver
c
- MSC-51与外部数据存储器的一般连接方法：外部数据存储器的高8位地址由P2口提供，低8位地址线接地址锁存器的输出端。外部RAM的读、写控制信号分别接MCS-51的 、 。外部RAM的片选信号可由P2口未用的地址线的剩余口线以线选方式或译码方式提供-MSC-51 with the external data memory of the general connection method: external data memory address high 8 provided by the P