资源列表
encoder
- stm32编码器模式及中断配置,可以利用stm32读取正交编码器。CNT寄存器没10000代表一圈，每一圈产生一个中断，可以实时读取每一圈CNT值，以及总圈数(Stm32 encoder mode and interrupt configuration, you can use stm32 to read the quadrature encoder. CNT register no 10000 on behalf of a circle, each lap to produce an inte
AD9854
- AD9854的源代码，希望有啊不过你住打打打啊打(assadasdasdasdadsasdsadsadasdadsadas)
89c
- POCSAG编码，使用Ｃ语言编写，详细标注各子程序的用途(Pocsag Code POCSAG encoding, the use of C language, detailed tagging of the use of subroutines)
led
- 控制led的定时打开，关闭，并且实现按键控制(Control the timing of the led to open, close, and to achieve key control)
JZJP
- 基于stm32库函数版的4*4矩阵键盘(4*4 matrix keyboard based on STM32 library function version)
i2s_tx
- i2s发送模块，双声道发送数据，适用于i2s左对齐模式(I2S send module, double channel send data, apply to I2S left aligned mode)
ADCfncFFT
- 傅里叶转换程序，矩形函数傅里叶变换的理论结果。(Fu Liye transform procedures, theoretical results for rectangular functions, Fu Liye transforms.)
c
- DS18B20采集温度程序 程序中 有翻译(DS18B20 acquisition temperature program, the program has translation)
FLASH
- 操作单片机Flash，对其进行读取、写入、擦除等操作(operate the chip's flash)
nfc_p2p_initiator
- ARDUINO单片机的NFC程序，基于IIC；(PN532 on ARDUINO P2P mode, you can read and write ordinary card UID)
ARM_CAN.~(1).OutJob
- 一种arm的布板内容和它所用电路，以及所需材料及型号。(The contents of a arm plate and its circuit, and the required materials and models.)
ARM_CAN.~(2).OutJob
- 一种对arm的布板和它所用电路，以及所需材料及型号。(The contents of a arm plate and its circuit, and the required materials and models.)