资源列表
ASCI_TRAFFIC_LIGHT
- 用VERLOG实现交通灯程序，有红绿两种灯，绿灯到红灯，路灯闪10秒，可以调整红绿灯持续时间-VERLOG achieve with traffic lights procedures, two black lights, the green light to red lights, flashing lights for 10 seconds, can be adjusted duration of traffic lights
arm9
- ARM裸机实验,基础学习,跑马灯实验-ARM bare-metal experiments, basic learning, marquees experiment
cpldtoPCvhdlcoding
- CPLD与PC机通讯的VHDL代码，实用性强。-CPLD and VHDL code PC, communications,
SPI
- design and implement a digital system on the Altera NIOS board which will read an analogue input using MicroChip’s SPI MCP3202 12-Bit A/D converter. The 8 most significant bits of the converted data will be displayed on two seven segments of the NIOS
top
- 动态可重构的顶层设计，给出了所有的静态逻辑和端口设计啊-top design for PR
VGAHIGH
- 640*480分辨率直接写屏幕，使用BorlandC++3.1开发-640* 480 screen resolution direct write, use BorlandC++3.1 development
LMS
- 用于DSP的LMS算法源代码。采用C语言编写-For the DSP the LMS algorithm source code. Using C language
decoder3_8
- -译码器输出是低电平有效。所以每一次只有一个低电平。 --KEY1键和KEY2键和KEY3键作为 A b C信号的输入。LED灯作为输出显示状态 --按键的默认状态是1 高电平 --当按键按下时 对应的I/O为低电平（0）， --为了得到不通的值，三个按键不按下时，都是111.表示7；三个按键都按下时,都是000.表示0-- The output of the decoder is active low. So every time only a low level.- KEY1 a
ALU
- 8-bit unsigned, 16 operations(arithmetic and logic).
display
- 该程序为数码管静态显示程序。 每按一次 独立按键 中的 T0，数码管的值便会加一-The procedure for the digital static display program. Each time you press the button in the Independent, the value of the digital tube will add a T0
calculator
- simple VHDL calculator
code
- 51单片机+NRF24L01+显示屏的代码，简单代码，可参考可运行。-51 single+NRF24L01+ display code, simple code, reference can be run.