资源列表
16
- 该程序实现数码管的动态扫描，通过程序可以看见数码管轮流点亮-LED DISPLAY
WelcomeForm
- 基于嵌入式开发环境中的手持终端的欢迎界面代码如下-Based on the welcome screen of the handheld terminal code embedded development environment are as follows
CheckSumTCPIP
- 此程序为网络通信的16位校验累加和的经典程序。虽然简单但是很经典。代码简洁，执行效率高-procedure for the communications network 16 and the cumulative calibration procedures classic. While simple but classic. Code simple, high efficiency
DAC_LTC1446
- DAC_LTC1446 programing code
HDLC_controller.rar
- a verilog code for hdlc controller,a verilog code for hdlc controller
Mealy
- Finit state machine souce code
display
- stm8s 中显示程序,作为开发ST的单片机参考使用！-stm8s in the display program, as the development of ST' s Microcontroller Reference to use!
interrupt1
- 1：P1口接8个LED，单脉冲电路的负脉冲端接到单片机的P3.2引脚上。编写程序，使定时器0的中断方式产生100ms的延时，实现8个LED的亮点流动。在流动的过程中，如果按下单脉冲键，8个LED的发光状态将改变为同时闪烁，闪烁8次恢复亮点流动（闪烁时间间隔由延时程序完成）。 -1: P1 mouth 8 LED the negative pulse end of the single-pulse circuit connected to the MCU P3.2 pin. Writing p
matrix
- matrix.C 该文件是矩阵键盘的驱动代码，其中包括了main主函数以及矩阵键盘判读的代码- matrix.C
8-by-8-dot-matrix-display-0-9
- 点阵显示实验，主要实现LED灯的显示控制，显示0-9数字-Dot matrix display experiment, the main display control LED lights display 0-9
4
- 数码管6个管同时点亮，依次显示0到f，间隔为0.5是，循环下去-Digital 6 tubes lit simultaneously, sequentially displayed 0 to f, at intervals of 0.5, the cycle continues
QPSK
- modelsim环境下QPSK解调电路的仿真-modelsim simulation environment under QPSK demodulation circuit