资源列表
bujindianji
- 1、本程序用于测试4相步进电机常规驱动 2、需要用跳帽或者杜邦线把信号输出端和对应的步进电机信号输入端连接起来 3、速度不可以调节的过快，不然就没有力矩转动了-1, the procedures for testing of conventional 4-phase stepper motor driver 2, need to jump or DuPont line to cap the output signal and the corresponding stepper m
sscanf
- 在某些嵌入式系统里没有sscanf库函数，手动实现了这个函数。-In some embedded systems do not have library function sscanf, manual implementation of this function.
4
- Verilog写的 8 位超前进位加法器-Verilog write 8-bit CLA
verilog
- 经典verilog实例，将近130多个。包含大部分设计基础实例，有益于初学者学习。-Classic example of verilog, nearly more than 130. Contains examples of most of the design basis, the benefit of beginners learning.
counter
- This a simple Counter -This is a simple Counter
tcounter
- tcounter vhdl descr iption
interleaver
- vhdl code for interleaver
DIVIDA
- 20位除法器，vhdl语言所写的，不错的代码，仅供参考-20 divider, vhdl language written
cs
- 计数器设计结果用七段数码显示译码器设计,-Counter with seven segment digital display design results decoder design,
AVR_Motoer_PWM
- AVR 使用PWM驱动L298N程序.使用了相位修正PWM。2K的频率。效果比较好
dff1
- --学习D触发器的原理 --按下学习板的KEY1键，LED灯会显示状态 --按下按键，对应的I/O是低电平。所以LED灯会亮?-- Learn the principles of the D flip-flop- Press the learning board of KEY1 key to display the status LED Lantern- press the button, the corresponding I/O is low. So LED lights?
1602
- ATmega16 LCD1602源代码，但不是宏定义-The ATmega16 the LCD1602 source code, but not the macro definition