资源列表
ad5510
- TLC5510 的状态机控制程序，控制方法简单，并已经测试通过。-TLC5510 control procedures of the state machine, control method is simple and has the test.
SPI
- pic18f452常用C语言代码 例如spi-pic18f452 common C language code such as spi
jia1_jian1
- 按键加1减1---通过两个中断来实现，按下键1（中断1）实现加1，按下键2（中断2）实现减1-Buttons plus 1 minus 1--- achieved through two interrupts, press the button 1 (interrupt 1) implementation by 1, pressing the button 2 (interrupt 2) implementation by 1
new
- four bit shift register verilog code-four bit shift register verilog code
S2_div
- 1、时钟分频，可以观看仿真波形 2、可以添加到硬件逻辑分析仪中观看波形-1, clock frequency divide, you can watch the simulation waveform 2, can be added to the hardware logic analyzer for waveform viewing
crc
- CRC编程源程序，使用Verilog硬件编程语言进行编程-CRC program source code, Verilog hardware programming language used to program
code1
- Line follower code taking input from infrared sensors
lesson9
- 1602液晶显示程序（初始化程序）（写字符 串）-1602 LCD program (initialization) (written characters) (write-string)
the-interconversion
- 华氏温度和摄氏温度的相互转换,详细的代码来说明转换过程。-the interconversion of Fahrenheit and centigrade.
selfRst
- 用于产生自复位的信号，有内部校验，可以确保不会误复位，复位时间也可以人为设定。-Used to generate a self-resetting signal, internal calibration, can ensure that no mistake is reset, the reset time can also be man-made.
iir_pipe
- 此程序应用了流水线技术来实现IIR滤波器，它是由一个非递归部分和一个具有延迟为2和系数为9/16的递归部分构成。-The procedure applied to the pipeline techniques to achieve an IIR filter, which consists of a non-recursive portion and having a delay of 2 and a coefficient of the recursive part 9/16 constit
stm8s_eeprom
- stm8s_eeprom编写程序基于stm8s的芯片-stm8s_eeprom program