资源列表
frequency_counter_2(successful)(top-down design).r
- 小巧的频率计数器，VHDL源代码和仿真文件具全，直接从管工程文件拷贝过来。绝对可用。-compact frequency counters, VHDL source code and simulation with all documents directly from the control engineering documents copied. Absolutely available.
CAN协议控制器的Verilog实现
- 基于FPGA的CAN总线控制器，VERILOGHDL源代码，Q2仿真实现。可用。-FPGA-based CAN Bus Controller, VERILOGHDL source code, Q2 Simulation. Available.
ddsVHDL
- 基于VHDL的DDS设计，在QUTURS2zhon仿真通过-based on the DDS VHDL design and simulation through the QUTURS2zhon
状态机设计
- 详细说明状态机的设计，用VHDL实现，是不错的教程-detailed state machine design, VHDL, is a good guide
vhdl平方根
- 计算某数的平方根，VHDL语言，使用简单-calculate the square root of a number, VHDL, use simple
vhdl对数
- 对数计算源程序，能够在FPGA中计算某数的对数，VHDL源代码，-right calculating source, the FPGA can be calculated for a number of a few, VHDL source code,
8倍频vhdl
- 该文件可用vhdl语言实现时钟8倍频，运行环境可在maxplus2和ise的仿真软件上-the document available VHDL Language 8 clock frequency, the operating environment and ideally maxplus2 simulation software
rat-4.2.25.tar
- Linux下的voip通信終端軟件,common目綠為多媒體開發包,主要提供內存mbus,md5,hmac,網絡接口方面的函數.rat為主要的函數集.-under Linux software voip communication terminals, common green head for multimedia development kits, main memory to provide legal, md5, hmac, network interface functions. ra
uCOS-IIi2c
- 基于ucos下的I2C主设备操作。包含i2c在ucos下的驱动-based on the I2C CENTER main equipment operators. I2c included in the drive CENTER
8019uCOS-II
- tcp/ip 协议栈， 8019网卡驱动-tcp / ip protocol stack, 8019 NIC drivers
LPC21XX工程模板
- philips arm开发工程模板，包括基于philips arm的ucosii和ucgui, 以及一些常用接口的驱动程序。-Philips arm development project templates, arm-based Philips and the ucosii ucgui. and some common interface driver.
miniweb-0.7.5
- MINIWEB 0.75, 可以用于嵌入式系统设计。-MINIWEB 0.75, can be used in embedded system design.