资源列表
可编程串行口与PC机通讯实验
- 利用8251芯片，实现与PC机通讯。本实验实现以下功能，将从PC机键盘上键入的数字、字母显示到PC机显示器上，实现PC机自发自收。-use of 8,251 chips, with PC communications. The experimental realization of the following functions from PC keyboard typing the numbers, letters shows that the PC monitors, PC spontane
串并转换实验程序
- 利用8031串行口，和并行输出串行移位寄存器74LS164，扩展一位数码显示在数码显示器上循环显示0-9这10个数字-use 8031 serial port, parallel and serial shift register output 74LS164 expand a digital display on the digital display shows 0-9 this cycle 10 figures
DSP_dio_C
- DSP2407上实现数控IO功能的C语言源程序，此程序与硬件有关（使用了CPLD），但测试部分有一定参考价值。 -DSP2407 NC IO on the C language function source, this procedure with the hardware (using the CPLD), but there are certain tests of some reference value.
DSP_SCI_C
- DSP2407实现SCI串口通信的C语言源代码。 分别使用2个中断实现串口的接收/发送。-DSP2407 achieve SCI serial communication C language source code. The use of two separate Serial interrupted the receive / transmit.
DSP_interp_line_C
- DSP2407平台下用C语言实现的数控直线插补源代码。T2中断插补周期2ms，可设定两组PWM输出状态，实现两个电机控制。使用了数字增量插补时间分割法进行直线插补。-DSP2407 platform using C language NC linear interpolation source code. T2 interrupted interpolation cycle 2ms, set two PWM output and achieve two motor control. The us
src_program1
- 该程序用于采样频率的转化，使用visualdsp++开发环境开发的。-procedures for the sampling frequency conversion, the use VisualDSP development of the development environment.
VHDL 的实例程序，共44个
- 经典VHDL 的实例程序，共44个！要下载的尽快-classic examples of VHDL, with a total of 44! To download as soon as possible
红外遥控机器人模板_AVR
- 采用电视遥控器控制的小车，采用AVR单片机，C语言开发，无电路图-using the TV remote control car, using AVR, C-language development, no circuit
apcswRel3.6A.2001.1011.1427
- Lucent的ATM处理套片APC驱动DEMO-Lucent ATM processing chip set APC driver DEMO
PLI
- VCS下编译通过的PLI的实例，包括功能仿真，和可综合代码-VCS compiled under the pli example, including the functional simulation, and integrated code
fifo1616
- FIFO先入先出堆栈，包括三个子程序，可根据需要选择-FIFO first in-first stack, including three subprogram, according to choose
RISC8.ZIP
- 简单的一个8位RISC，Verilog HDL代码,类型为pic16c57-a simple eight RISC, Verilog HDL code, the type of pic16c57