资源列表
硬件实验1工具
- c语言编程工具，特别好用，你值得拥有。还有各种单片机c语言程序，欢迎使用。(i know then you know.)
vga
- 直接在quartus 2上运行，然后烧进试验箱，可以播放梁祝，连线就两根，一根连20MHZ，一根连蜂鸣器输入端，另一头连拓展插槽的B01，按键1控制播放、暂停，模式5，可以用点个赞，(Run it directly on quartus 2, and then burn it into the test box. You can play Liang Zhu. There are only two wires, one is 20MHz, one is buzzer input, the oth
STM103步进电机控制
- STM103VCT6实现多轴步进电机控制(Stm103vct6 realizes multi axis stepping motor control)
STM32NBIOT_M5311连接服务器
- 通过m5311nbiot模块上传温湿度信息到指定服务器，可根据教程修改为连接onenet云平台。(Upload temperature and humidity information to the designated server through the m5311nbiot module, which can be modified to connect to the onenet cloud platform according to the tutorial.)
alu
- 行为级建模，实现16种逻辑运算和算术运算功能(Behavior level modeling, realizing 16 kinds of logic operation and arithmetic operation functions)
源程序
- 串口232进行的单片机通迅，带有触摸屏设置参数功能，调节(Serial communication)
防止幼儿误锁车内报警系统
- 当车门锁住之后利用人体红外传感器、称重传感器等传感器检测车内是否有误锁的幼儿，如果有则通过gsm模块发送报警短信，防止幼儿误锁车内。(When the door is locked, the infrared sensor, load cell and other sensors of human body are used to detect whether there is a child locked by mistake in the car. If there is, the alar
WINCE700drv_usbcam_5.19
- WINCE USBCAM modified driver(WINCE USBCAM modified driver (CMOS SENSOR POWER SUPPLY bmControl added))
smarthome
- 基于STM32的智能家居控制系统，通过语音识别模块实现(Smart home control system based on stm32, realized by voice recognition module)
基于STM32的nRF905程序,调试通过,绝对能用
- 基于STM32的nRF905程序,调试通过,绝对能用
xpt2046驱动
- 一款电阻屏的驱动文件，linux-xpt2046驱动，非单片机驱动，是linux的。 压缩包包含xpt2046.c xpt2046.h,使用的是spi总线.供大家使用
BMA250
- BMA250加速器，驱动代码，带校准补偿功能，现已调通，分享给需要的小伙伴。(Bma250 accelerator, drive code, with calibration compensation function, has been adjusted and shared with the required partners.)